When i got a float bowl off of E-Bay recently that the seller claims its for an SG however it is not.The holes don't line up at all.The bowl has a stamp on it that reads "E". On my SG the bowls read "B". What do the letter stand for?
Announcement
Collapse
No announcement yet.
float bowl letters
Collapse
X
-
Probably nothing useful.... Those could be anything from a mold identifier to a 'shift' or 'date' mark (when built) or even a 'assembler' mark (who put it together).
Look here for positive identifiers for the float bowls....
http://www.xs11.com/forum/showthread.php?t=35964Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...
-
Steve-the thread that identifies the carb differences-have a bump in the float bowl it says for 80-82-the one i got doesn't have this bump.The slot in the top of the one i bought doesn't extend all the way across the top either.The only good thing about the bowl was the drain bolt and washer was brand new and i needed them. As far as the letters-i see some bowls on E-Bay with the same letters.1980 XS1100 SG
Inline fuel filters
New wires in old coils-outer spark plugs
160 mph speedometer mod
Kerker Exhaust
xschop K & N air filter setup
Dynojet Recalibration kit
1999 Kawasaki ZRX1100
1997 Jeep Cherokee 4.5"lift installed
Comment
-
No bump in the bowl, it's a '78-79 type....Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...
Comment
-
That's what i got.Anyone need a bowl let me know-has no drain bolt though!1980 XS1100 SG
Inline fuel filters
New wires in old coils-outer spark plugs
160 mph speedometer mod
Kerker Exhaust
xschop K & N air filter setup
Dynojet Recalibration kit
1999 Kawasaki ZRX1100
1997 Jeep Cherokee 4.5"lift installed
Comment
Comment