Prime
"IF" everything is just like new, and all needles are working like new and everything is sealing like new (and it is on some bikes) then "prim" will just fill the carbs to the right level to start the bike. You said gas flowed out the air box and the bike would not start. i am guessing that everything is not working as new No shock on an antique bike. The info I gave was to make sure your bike didn't back fire and burn to the ground. Drain the air box and overflow from carbs, shut off the fuel flow till you get the bike to fire and burn up the flooded fuel, then start the bike with the least amount of gas in the carbs as needed and let the vacuum open up the fuel flow as the bike needs it, your bike, your call
Originally posted by Cuda 69
View Post
Comment