If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have recently purchased a 1981 1100 xs.I cannot find a supplier for the pads,and could use fresh shims to boot.A reference for
cheap parts would be great.
Can anyone help?
chris
EBC and Yamaha both still make pads for the XS, any motorcycle shop or mailorder house can get you EBC brakes. We use Zanotti's for most stuff because of the huge discount to list members.........I think the shims would have to go through Yamaha. Nice thing about Zanotti's is they will sell you either one since they are a Yanmaha dealer, he will quote you both prices.
Zanotti Motors
Web Site: http://www.zanottimotor.com
Email: zanmot@aol.com
Butler, Pa. 16001
Phone: (724)283-2777
Fax: (724)283-0383
Zanotti's is a Harley/Honda/Yamaha factory dealership. They offer deep discounts on Internet sales of factory parts. Discounted parts can be ordered at their web site, by e-mail or by telephone. On phone orders you can still get the Internet discount as long as you tell them it's an Internet order. An additional small discount is given if you supply the factory part number from a parts listing or microfiche (See microfiche sources above). Some XSives have said that it is also helpful to mention the XS/XJ 1100 Owners Association (XSOA). They will also special order some non-Yamaha parts, including tires, at discount. Check with them for details. For phone orders ask for John in Internet Sales.
Gary Granger Remember, we are the caretakers of mechanical art. 2013 Suzuki DR650SE, 2009 Kawasaki Concours 1400, 2003 Aprilia RSV Mille Tuono
You might keep an eye on "www.partsnmore.com". They should have parts listed for XS11s soon and they have good prices. I think the pads listed there for the XS850 are the same as XS11. Does anyone know if the pads are the same?
Bill Murrin
Nashville, TN
1981 XS1100SH "Kick in the Ass"
1981 XS650SH "Numb in the Ass"
2005 DL1000 V-Strom "WOW"
2005 FJR1300 Newest ride
1993 ST1100 "For Sale $2,700" (Sold)
2005 Ninja 250 For Sale $2,000 1100 miles
Hello,
there is some guy in cleveland that had been selling brake pad set front (both side) & rear, and the shims and pins for like
$40 bucks. i have not bought a set yet myself but i plan to after the season is over. Has any list memeber purchased these pads? are they any good? any feedback on them. If i don't get them i will get SBS ceramic pads like we put on my friends xs750sf. for all three sets of pads it set him back $100.00.
ceramics are the best brake pads made, and most newer midsize and up cars have them factory installed. that is why when you change you car brakes they are noisey and squeak.
Comment