Tweet
1980 xs1100 special, stock fuel tank with original petcocks. getting ready to have tank repainted and i want to have new o-rings for the petcocks. "obsolete" according to yamaha. will any other part number from yamaha work? any other source? thanks
-
-
i should have been more specific. i want the tank-to-tap o-ring. -
Those seals come in petcock rebuild kits. If you have a good hardware or auto parts store, they can match it up for you.
Part number 2W6-24512-00-00 is available. Yamaha Parts House has them for $2.95 each.
Items 15-28
Marty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
Those seals come in petcock rebuild kits. If you have a good hardware or auto parts store, they can match it up for you.
Part number 2W6-24512-00-00 is available. Yamaha Parts House has them for $2.95 each.
Items 15-28
Marty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
thanks for the helpComment
-
A word of caution.
The originals had two cross links that encased the holes for the bolts. A regular O ring does not provide that bit of sealing, so make sure that you use the gasketedbolts that were originally used to hold the taps in. A dab of gasket sealer on their mating faces before installation would not hurt.
CZComment
-
On one of my model E's I needed a "gasket" because my old one leaked. I used a regular o-ring for the perimeter and used fiber washers with flanged bolts to prevent leaks down the bolt threads. No leaks. Never replaced it with OEM style.Skids (Sid Hansen)
Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.Comment
-
IIRC, only the Standard petcocks use that 3 section O-ring, not the Specials. Both models do use those fiber bolt washers though.
Last edited by bikerphil; 12-08-2012, 02:13 PM.2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮Comment
-
BikerPhil, you do remember correctly. Specials use a standard o'ring.Marty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
O rings....
I found some on Ebay for 5 bucks total..........quick mailing as well.
Like stated in here......be sure to seal the bolds with a gasget of some kind. I replaced the O ring on my Special and it still leaked.
At this time:
1985 Goldwing Innr.
1976 cb 750 cafe racer
2007 vtx 1300
81 sx 1100 s h
81 sx 400 specialComment
-
If you decide to make gaskets I recommend this stuff. It's white in color and has a very high resistance to gasoline. I always like to keep some around. If you can find it in 1/16" thickness then you can use it on fuel bowls and everything else. It will not harden dry or rot.
http://www.grainger.com/Grainger/ecatalog/N-1z0dtth
http://www.rubbersheetroll.com/nitri...h-strength.htmLast edited by Yard Dogg; 12-09-2012, 02:58 PM."The Hooligan" XJ1100, Virago Gauge Pods, Screaming Eagle Mufflers, K&N Filter, hand made rear fender, side covers, and solo seat, round bar conversion, small headlight, tail light, and cat eye turn signals, chip fuses, rewired the right way.
Pics: http://s1236.photobucket.com/user/ya...?sort=6&page=1Comment
-
The stuff I bought was white in color."The Hooligan" XJ1100, Virago Gauge Pods, Screaming Eagle Mufflers, K&N Filter, hand made rear fender, side covers, and solo seat, round bar conversion, small headlight, tail light, and cat eye turn signals, chip fuses, rewired the right way.
Pics: http://s1236.photobucket.com/user/ya...?sort=6&page=1Comment
Comment