Tweet
It looks like a regular Standard seat pan but the seat foam and cover look much more low profile and cafe. Is this factory or a custom job?
-
It looks like a regular Standard seat pan but the seat foam and cover look much more low profile and cafe. Is this factory or a custom job? -
Bike looks to to be non U.S. just from the engine cover styles. Seat topside styles may have been different also.81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top. -
Just looks like a standard seat that has had the foam shaved way down. Some do that just to lower the height some for short people.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltComment
-
Another pic...
I can't find a seat cover that will fit that shape of foam. I need something thinner for my bike and the standard seat I have is too beefy.
Here's something like it...
It's way too expensive, especially because it will probably need some modification to mate with my Special tank.Comment
-
I am 6' and I can stand up and have an inch or two in-between me and the seat.
You must have short legs
Catmaigne
The bike in the pic is definitely a euro model as has been stated, maybe they have different seats, who knows. Your best bet would be is to take the seat to a shop that does seats (boat shops usually do this stuff) and bring the pic of that seat and see what they can do. I bet the stock seat cover would work just fine too.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltComment
-
Legs
You may be right about that know that I think about it, ha. I'm all torso.I am 6' and I can stand up and have an inch or two in-between me and the seat.
You must have short legs
Catmaigne
The bike in the pic is definitely a euro model as has been stated, maybe they have different seats, who knows. Your best bet would be is to take the seat to a shop that does seats (boat shops usually do this stuff) and bring the pic of that seat and see what they can do. I bet the stock seat cover would work just fine too.1980 xs1100G - Sold
1981 Venturer - StockComment
-
Better late than never...
As the image says - its from Italy most likely.
It is a 79 Euro standard, drilled rotors, aftermarket fugly horns and turn signals, mirrors are from louis.de, so are a bunch of other parts (footpeg, engine guards, etc).
Seat is stock, but with cut foam. Looks like home made or a cheap shop did it.
A guy I bought my 1.1 standard from, has one just like in the pic - in his dining room (alltho a bit more original).
If it doesn't have an engine, it's not a sport, it's only a game.
(stole that one from I-dont-know-who)Comment
-
That is a beautiful seat.Comment
CZ
Comment