I get a strange Shaking feeling in the bike under load/ acceleration. around 40mph and up when on the throttle. It seems to go away if I pull in the clutch so I'm thinking it is drive line related rather than wheel bearing/chassis but I could be wrong. Is there any way to rule out Transmission, Clutch, Differential, etc? Any Help or suggestions are appreciated.
Bike has about 28k miles on it.
New Tires front and rear
Never changed the wheel bearings.
Never serviced the Middle or Differential drives.
Thanks
Mark
Bike has about 28k miles on it.
New Tires front and rear
Never changed the wheel bearings.
Never serviced the Middle or Differential drives.
Thanks
Mark
Comment