Tweet
i been thru 3 differnt left contols and all three have crap'd out on me. all 3 solderd wires brake off every fing time...so i guess my question is has anyone ever retro fitted a newer sport bike control to these bikes....im ok with wiring and have the tools to push the pins out of the connector and have simmular female/male connectors
-
_____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike) -
I have resoldered the wires back in....if that helps you at all.Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750 -
See i have tried that but it still brakes. I clean the **** out of the contact points then soliderafyer about 2 weeks it brakes again_____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)Comment
-
Lee,
Have you looked into these new ones that Mike's XS sells?
Marty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
Looks nice
If its plug and play what a deal.
JohnJohn is in an anonymous city with an Alamo (N29.519227,W-98.678980)
Go ahead, click on the bikes - you know you want to...the electrons are ready.
'81 XS1100H - "Enterprise"
Bob Jones Custom Navy bike: Tkat brace, EBC floating rotors & SS lines, ROX pivot risers, Geezer rectifier, new 3H3 engine
"Not all treasure is silver and gold"Comment
-
Marty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
While it is not a plug and play switch, it is also not that hard to switch which wires need to be switched. The whole MikesXS switch is same as ours but the wiring at the plug does differ. Just a matter of following a few wires and re-doing them.2-79 XS1100 SF
2-78 XS1100 E Best bike Ever
80 XS 1100 SG Big bore kit but not fully running yet.
Couple of more parts bikes of which 2 more will live!Comment
-
ok so 51 buxs compaired to a 25 dollers for r6.r1 switches... i guess as long as there is the same amout of wires (should be) i guess ill be ok...my main question was if there were any member useing a modern set of switches.._____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)Comment
-
There may be some out there that would work, but the problem would be finding some that use the same switching arrangment as the XS. While somewhat common back then, many of the more modern bikes use simpler switches with black boxes to perform the flashing/cancelling. There's really no 'standard' arrangment for the turns, you'll have to do some research for a switch or change the rest of the wiring...Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
And the biggest problem are the 7/8" bars. Not really Amy of those around now days.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltComment
-
1980 XS850SG - Sold
1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).
Whether you think you can, or you think you cannot - You're right.
-H. FordComment
-
Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltComment
Comment