Tweet
Does anyone have a schematic/diagram of the parts breakdown for the above title. My FSM only has it for the original E.
-
BAMN!
'81 XS1100H "Brutus" -
The carbs are essentially identical; there's detail differences (floats, float valves, idle screws, etc) so while the parts may not look exactly the same, a given part is in the same place. The only thing I can think of that could trip you up is the idle screws. The '80-81 have those o-rings and washers that go on the end of the idle screw, otherwise everything else goes together the same.Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone... -
Look up the Tech Tip or thread titled Carb Cleaning 101. That set of pics and instructions is based on the 80-81 carbs.Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750Comment
Comment