Tweet
yeah those mounts are going to be a headache, thanks for the pics it helps a lot...if i cant find any its going to end up being some kind of hose-clamp and zip-tie monstrosity, and thats not the look i'm going for. but again if anyone has any past experience rigging this stuff up to look somewhat clean i'd love to hear what you did
-
80 XS1100G -
Or make up a L bracket to bolt onto the lower trees and then bolt the light to the bracket.
Hose clamps and zip ties look bad.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltComment
-
Are these what you need?
Turn Signal Brackets Stainless Steel XS650
I'm going home tomorrow and I can check if the XS650 tree has the same bolt spacing as the XS11.Marty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
Those might work on the Special lower tree (where the pinch bolts face to the side), but not the standard; they face foward....Originally posted by jetmechmarty View Post
Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
I found one (right I think) on ebay.
http://www.ebay.com/itm/Yamaha-NOS-C...item2a17c515a5
It's a little pricey, but it looks to be in mint condition.
the part numbers are 2h7-23132-00-00 and 23122 (right/left)
I hope that helps a little. The bracket idea seems like it might work. Bolt them right to the lower tree and then use any XS light.Hi, my name is George & I'm a twisty addict!
80G (Green paint(PO idea))
The Green Monster
K&N A/F, TC's fuse block, '81 oil cooler, TC's homemade 4-2 w/Mac Mufflers, Raptor 660 ACCT
Got him in '04.
bald tire & borrowing parts
80SG (Black w/red emblems & calipers)
Scarlet
K&N A/F, TC's fuse block, WJ5, Shoei bags, Raptor 660 ACCT.
Got her in '11
Ready for the twisties!
81H (previously CPMaynard's)
Hugo
Full Venturer, Indigo Blue with B/W painted tank.
Cold weather rideComment
-
John is in an anonymous city with an Alamo (N29.519227,W-98.678980)
Go ahead, click on the bikes - you know you want to...the electrons are ready.
'81 XS1100H - "Enterprise"
Bob Jones Custom Navy bike: Tkat brace, EBC floating rotors & SS lines, ROX pivot risers, Geezer rectifier, new 3H3 engine
"Not all treasure is silver and gold"Comment
-
I believe these don't work. The bolts on the lower tree on the XS650 are perpendicular to the wheel. I don't believe that is so on the XS11.Marty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
I just had a look and took a scale with me. Those Motolanna brackets will work on the Special. Best I can tell the bolt spacing on the lower tree is the same on the XS11 and the XS650. Bolts are perpendicular to the tire on both bikes.Marty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
Thanks Marty!
Good info.
I like that site! That aluminum swingarm looks sweet.
JohnJohn is in an anonymous city with an Alamo (N29.519227,W-98.678980)
Go ahead, click on the bikes - you know you want to...the electrons are ready.
'81 XS1100H - "Enterprise"
Bob Jones Custom Navy bike: Tkat brace, EBC floating rotors & SS lines, ROX pivot risers, Geezer rectifier, new 3H3 engine
"Not all treasure is silver and gold"Comment
Comment