Tweet
Heres a pic of my beauty.
-
Mike Giroir
79 XS-1100 Special
Once you un-can a can of worms, the only way to re-can them is with a bigger can. -
Easier to have one common thread, start date doesnt really matter either. I say it should ve a sticky over there but it just floats around and gets bumped every couple months.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltComment
-
60 pages, plus it does make a difference, a lot of post no longer have pictures due to expiring host accounts. Not to hijack a nice thread or argue pointlessly but, it's kinda like the old "someone asked that question already" complaint. Unless the Mods have an issue, I say I'll enjoy viewing a new thread with a lot of new members and old members with new changes to their bikes.81 XS1100HComment
-
A lot of the external links are dead for pix of bikes. You're right, it makes nice reading to see new pix anyway, or repeats of old pix or whatever, in a new thread. Here's mine again....any excuse...
XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
Whoa...James...SWEET! Never seen tires like that. Avon Roadrunners? Did you detail the letters yourself? What sizes?Former owner, but I have NO PARTS LEFT!
Comment
-
The tyres (and the tires) and readily available here in the UK and are a perfect fit for the standard bikes. Front is Avon AM26 100/90/19. They are both Avon Roadrider. I don't think Roadrunners are made any more?Originally posted by DAVINCI View Post
and the rear is AM26 130/90/17
Yes, I always do the letters myself with some shiny metallic flake gold paint (for Christmas tree baubles etc) and a brush. It doesn't take long and stays on the tyre for a very long time. Someone told me they hate it and that it looks daft but, when I fitted new tyres, I really noticed it was missing and I personally like it!
The rear tyre fits the swingarm properly and I've found they are a good long-lasting tyre which grip perfectly in the dry and which perform perfectly adequately in the wet (which I tend to avoid, more for the bike than for me)..Last edited by James England; 12-16-2011, 10:54 AM.XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
Hi James
Love your bike! Is that a stock "style" paint job, or custom? Love the first pic, a mans home realy is his castle
Last edited by XS1100_OEM4ME; 12-16-2011, 11:19 AM.1979 XS1100 Special (Mad Max, OEM) Current
1980 XS1100 Special
1990 V Max
1982 KZ750 LTD Twin
1986 700 FZR Yamaha Fazer (faster then expected)
1979 XS750 Special (my 1st Special)
1974 CB750-Four
Past/pres Car's
1961 Catalina 389/1970 Torino GT 351/1967GTO 12to1 comp./ Roller cam/ T-10/ 456 gear/Tri-power/1967 GTO 400, 1969 Camaro, 1968 Z28, 2001 BMW M Roadster 0 to 60 in 4.5 sec. Jaguar XK8Comment
-
Gone but not Forgotten...
[IMG]
[/IMG]
SG, since on to a new owner....Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
Thanks All
OK, I didn't mean to jack a post that was started on the other forum
But I have enjoied getting to see your bikes
And, yes, the custom ones look great also. I have a new respect for how great the standards can look too It shows a lot of love and hard work went into your bikes, I think you guys and gals did a great job, thanks for sharing
1979 XS1100 Special (Mad Max, OEM) Current
1980 XS1100 Special
1990 V Max
1982 KZ750 LTD Twin
1986 700 FZR Yamaha Fazer (faster then expected)
1979 XS750 Special (my 1st Special)
1974 CB750-Four
Past/pres Car's
1961 Catalina 389/1970 Torino GT 351/1967GTO 12to1 comp./ Roller cam/ T-10/ 456 gear/Tri-power/1967 GTO 400, 1969 Camaro, 1968 Z28, 2001 BMW M Roadster 0 to 60 in 4.5 sec. Jaguar XK8Comment
-
1st XS1100
My 1st XS1100, WOW, was she a HOT one
This is what it looked like after I let the Ghost Rider take for a spin (LOL)
Last edited by XS1100_OEM4ME; 12-16-2011, 11:39 AM.1979 XS1100 Special (Mad Max, OEM) Current
1980 XS1100 Special
1990 V Max
1982 KZ750 LTD Twin
1986 700 FZR Yamaha Fazer (faster then expected)
1979 XS750 Special (my 1st Special)
1974 CB750-Four
Past/pres Car's
1961 Catalina 389/1970 Torino GT 351/1967GTO 12to1 comp./ Roller cam/ T-10/ 456 gear/Tri-power/1967 GTO 400, 1969 Camaro, 1968 Z28, 2001 BMW M Roadster 0 to 60 in 4.5 sec. Jaguar XK8Comment
-
Originally posted by crazy steve View Post[IMG][/IMG]
SG, since on to a new owner....
That bike looks identical to the red bike trbig has. Except his is an SH.
Greg
Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid.”
― Albert Einstein
80 SG Ol' Okie;79 engine & carbs w/pods, 45 pilots, 140 mains, Custom Mac 4 into 2 exhaust, ACCT,XS850 final drive,110/90/19 front tire,TKat fork brace, XS750 140 MPH speedometer, Vetter IV fairing, aftermarket hard bags and trunk, LG high back seat, XJ rear shocks.
The list changes.
Comment
-
It's the standard Yamaha black, which actually has a very very fine dusting of gold flakes in it as standard. Decals are repro but standard in design and benefiting from being made of modern material (so thinner and easier to go under lacquer coat).Originally posted by XS1100_OEM4ME View PostLove your bike! Is that a stock "style" paint job, or custom? Love the first pic, a mans home realy is his castle
My home? Naw.... that's my outbuildings to keep the bikes in
Here's another one I had, next to my bro's Kawasaki ST1000:
Pic was taken in 1989 in Scotland. A year ago, my brother saw an advert for an ST1000 foir sale here in England. It was his old bike! When he sold it, it had done 95,000 miles. When he saw it again 22 years later, it had 35,000 on the clock, with the owner vouching for its authenticity. Embarassing for him when he was informed of the truth....Last edited by James England; 12-16-2011, 11:57 AM.XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
Probably not quite identical... this one has standard forks/wheels and Harley turn signals...Originally posted by BA80 View PostThat bike looks identical to the red bike trbig has. Except his is an SH.
But it's tough to come up with anything really 'new'.Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
79F ↓
79SF ↓
2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮Comment
Comment