Torque Spec's

[mack]

Just verifying:
front upper brackets -24.5 ft/lbs
front motor mounts - 48.5
rear motor mount - 72.3
swing arm centering pins - snug
Swing arm lock nuts- 72.3

gets bad when you can't trust the books. Don't suppose anyone has sat down and cataloged all the printed torque errors.

[cywelchjr]

Just verifying:
front upper brackets -24.5 ft/lbs
front motor mounts - 48.5
rear motor mount - 72.3
swing arm centering pins - snug
Swing arm lock nuts- 72.3

gets bad when you can't trust the books. Don't suppose anyone has sat down and cataloged all the printed torque errors.

swing arm centering pins are 43-52 inch lbs, which is a long way short of snug in my book.

[cywelchjr]

BTW that came from the old .org site from a thread on mistakes and omissions in the manuals, it was the first one in the thread, I didn't look at the others cause I remembered it being the first one. I think it there was a thread started on that over here too but I was unsuccessful at finding it and I could find it over there (the only reason I used that reference)

[mack]

Thanx

Thanx Cy, when I was younger, I could probably achieve that torque with my fingers, however that was a long time ago. I have a 1/4 drive in inch/lbs now for just this sort of thing.

[BA80]

swing arm centering pins are 43-52 inch lbs, which is a long way short of snug in my book.

BTW that came from the old .org site from a thread on mistakes and omissions in the manuals, it was the first one in the thread, I didn't look at the others cause I remembered it being the first one. I think it there was a thread started on that over here too but I was unsuccessful at finding it and I could find it over there (the only reason I used that reference)

http://xs11.46.forumer.com/swing-arm-bearing-torque-t217140.html?sid=2b78dc3bb278d63f35e990e8be26211e

[cywelchjr]

http://xs11.46.forumer.com/swing-arm...e990e8be26211e

That's the one I know find Greg, it's the one HERE I couldn't find.

[BA80]

That's the one I know find Greg, it's the one HERE I couldn't find.

Sorry, misread. thought you were looking for that one. Specs are there though along with some good info.