If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
still dont see any clips. guys talk about them, but no see. diagram was for an XJ. maybe ill just take em apart. sick of finding stuff wrong and have to fix, no ride. summer in Chicago ill be over. i lloked at a diagram for my 81 Special, dont know what would be called a clip?
Max
81 XS1100SH Black Beast Mutt
Kerker 4/1
stock carbs and air box.
78 headlite, handle bars,
1 set of ea-160/85mph guages,
crash bars, cruise control
Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid.”
― Albert Einstein
80 SG Ol' Okie;79 engine & carbs w/pods, 45 pilots, 140 mains, Custom Mac 4 into 2 exhaust, ACCT,XS850 final drive,110/90/19 front tire,TKat fork brace, XS750 140 MPH speedometer, Vetter IV fairing, aftermarket hard bags and trunk, LG high back seat, XJ rear shocks.
thanx BA, but i have an 81 Special. thats a 78 Standard. i look at Bike Bandits diagrams regularly to see what parts are avail and which are not, and to make sure when i have an issue, ive got all the parts i should. very helpful. i found the parts im missin are not avail anymore, so time to think out of the box.
Max
81 XS1100SH Black Beast Mutt
Kerker 4/1
stock carbs and air box.
78 headlite, handle bars,
1 set of ea-160/85mph guages,
crash bars, cruise control
Parts 10-23 and 9-22 on this drawing are what was missing, and causing the clicking on mine. Replacing them fixed it, but if all your bits are intact then it's not the same problem.
thanx BA, but i have an 81 Special. thats a 78 Standard. i look at Bike Bandits diagrams regularly to see what parts are avail and which are not, and to make sure when i have an issue, ive got all the parts i should. very helpful. i found the parts im missin are not avail anymore, so time to think out of the box.
Yeah, sorry. I don't know why I pulled up an E. Just had that on my mind for some reason.
Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid.”
― Albert Einstein
80 SG Ol' Okie;79 engine & carbs w/pods, 45 pilots, 140 mains, Custom Mac 4 into 2 exhaust, ACCT,XS850 final drive,110/90/19 front tire,TKat fork brace, XS750 140 MPH speedometer, Vetter IV fairing, aftermarket hard bags and trunk, LG high back seat, XJ rear shocks.
hey Greg, try keeping those goggles off when posting or wait till ur wipers are working. but thanx for the effort!
Brian, ive got all the parts shown in the diagram except the inner pad shim on both sides. after making sure all parts were there, i ended up putting some CRC disc brake quiet drying liquid silicone type stuff on em, let it dry overnite, and reinstalled the pads. so far the noise is gone.
Max
81 XS1100SH Black Beast Mutt
Kerker 4/1
stock carbs and air box.
78 headlite, handle bars,
1 set of ea-160/85mph guages,
crash bars, cruise control
Comment