When my 78 XS11 sits out in the sun all day, the front brakes lock up and won't let go. I think its because the fluid gets hot and builds up pressure. Shouldn't there be a vent to keep thin from happening? Any suggestions?
Announcement
Collapse
No announcement yet.
Sunshine Brakes
Collapse
X
-
hi rick,
theres no vents in a hydraulic brake line,
theres a small hole in the master cylinder than
can block up, do a search for spooge hole and
u should find a few threads about it.pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
[url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]
-
Have you changed the fluid? Have you rebuilt the calipers?1981 xs1100 venturer... Finally runs
Still has carb issues, but runs
For all of your Amsoil needs go to www.mrguysoil.com
Comment
-
Sunshine Brakes
The article on cleaning the spooge hole seems to have worked. When I pulled the master cylinder apart, I found a real mess. Cleaned it out good and ran a small wire through the spooge, (it was plugged solid). And problem seems to be gone. Would still like to rebuild break calipers and master cylinder. Anyone know the best place to get rebuild kits?RickMc
<ricks.mailbox@charter.net>
1978 XS1100E
Comment
-
if the brakes are working ull probably find u wont need
a kit as such, as long as the rubbers arent swollen or torn
the parts can be cleaned up and put back together without
any problems, use hot water to clean the parts and rubber grease
or brake fluid on the seals when reassembling.pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
[url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]
Comment
-
Sunshine Brakes
Thanks for the info. Left front caliper is leaking a little bit. Could be form when the spooge was plugged and it build up pressure. Guess I'll know when I tear it apart. Was thinking it might be good to have new rubber just in case. Left front shock is leaking a bit also. Just got to take some time and giver her some TLC.RickMc
<ricks.mailbox@charter.net>
1978 XS1100E
Comment
-
Originally posted by rickmc2000 View PostAnyone know the best place to get rebuild kits?
http://www.oldbikebarn.com/Street/1978-Yamaha-XS1100Greg
Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid.”
― Albert Einstein
80 SG Ol' Okie;79 engine & carbs w/pods, 45 pilots, 140 mains, Custom Mac 4 into 2 exhaust, ACCT,XS850 final drive,110/90/19 front tire,TKat fork brace, XS750 140 MPH speedometer, Vetter IV fairing, aftermarket hard bags and trunk, LG high back seat, XJ rear shocks.
The list changes.
Comment
-
I got my MS & Caliper kits from oldbikebarn.com last week and am happy with the results. I also bought stainless lines for $80 from this ebay person "coastguard1975" and am happy with them as well.
My rear brakes were hanging up even after I cleaned them. So I read up on here and it turns out that the brake lines tend to deteriorate and clog the system. Right now I'm waiting for a package from BikeBandit.com because I tore the slider boot when I was going threw the caliper. They are also sending me fork oil since one of them decided to start leaking all over my front brake this week.1980 XS1100G
-4:2 exhaust
-Pods
-Who knows what the future holds..
Comment
-
I got some kits from Georgefix on ebay. everything went fine. He has an excellent rep.Tom Clisham
Age is relative YOU WON"T GET OLD TIL YOU SELL THE BIKE
_____________________________________________
'78xs1100E ,all stock & original GONE TO WISCONSIN
'80 SG Vetter fairing,hard bags,trunk,fork brace,
stock headers with fishtail mufflers,black & beautiful GONE TO ARIZONA
79SF lowered,jardine 4/2 exhaust,pod filters,drilled rotors,fork brace, bar hopper
79SF 1 owner,8000 miles, restoring to completely original ( I hope) GONE TO FRANCE
Comment
Comment