Tweet
Anyone know what the torque spec for the rear hub mounting bolts are? Also the brake rotors? Not seeing anything for them in the book.
-
Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt -
Nate, the rotor bolts are 14.5 ft/lb, as specified in the FSM. As for the hub bolts, no torque value available, so just good 'n tite.2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮ -
torque
Phil's got it right. 14.5 with new lock/ retainers. Check page 5-21 in your 78E manual. If in doubt go with the gereral torque spec's by bolt diameter. That at least takes care of the discrepencies previously noted in these manuals.mack
79 XS 1100 SF Special
HERMES
original owner
http://i946.photobucket.com/albums/a...ps6932d5df.jpg
81 XS 1100 LH MNS
SPICA
http://i946.photobucket.com/albums/ad305/mack-055/2.jpg
78 XS 11E
IOTA
https://youtu.be/wB5Jfbp6SUc
https://youtu.be/RaI3WYHSuWA
Have recovery trailer and shop if you breakdown in my area.
Frankford, Ont, Canada
613-398-6186Comment
-
Thanks guysNathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltComment
Comment