Announcement

Collapse
No announcement yet.

Connector ? observation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Connector ? observation

    I've been replacing some of the connectors in the plastic plugs and the terminals seem grayish in color. The new ones are brass. I took a file to some of the old terminals and it looks like the originals were brass as well.
    Were they brass ?
    I'm amazed as to the oxidation. That grayish film had to be causing some considerable resistance.
    I would seem a worth while task to replace all of the terminals in the plugs.

    Rick
    XS1100F TKAT fork brace Stock suspension. Vetter Fairing. Pingel Petcocks. Geezer voltage regulator
    http://s910.photobucket.com/albums/a...t=DSCF3026.jpg
    650SF
    http://s910.photobucket.com/albums/a...t=DSCF2647.jpg
    XS1100SG Project bike
    http://s910.photobucket.com/albums/a...t=DSCF3034.jpg

  • #2
    Yup, best long-term solution is to replace em. Cleaning will get you a year or two depending on your climate.
    Former owner, but I have NO PARTS LEFT!

    Comment


    • #3
      Actually, that greyish coating is oxidized tin. Most small wire connectors are tinned as it's much more resistant to corrosion than bare brass. Make sure you pack those brass ones with grease...
      Fast, Cheap, Reliable... Pick any two

      '78E original owner - resto project
      '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
      '82 XJ rebuild project
      '80SG restified, red SOLD
      '79F parts...
      '81H more parts...

      Other current bikes:
      '93 XL1200 Anniversary Sportster 85RWHP
      '86 XL883/1200 Chopper
      '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
      Cage: '13 Mustang GT/CS with a few 'custom' touches
      Yep, can't leave nuthin' alone...

      Comment


      • #4
        Originally posted by crazy steve View Post
        Actually, that greyish coating is oxidized tin. Most small wire connectors are tinned as it's much more resistant to corrosion than bare brass. Make sure you pack those brass ones with grease...
        So the gray is not as bad as I thought?
        I am packing them in grease.

        Thanks
        Rick
        XS1100F TKAT fork brace Stock suspension. Vetter Fairing. Pingel Petcocks. Geezer voltage regulator
        http://s910.photobucket.com/albums/a...t=DSCF3026.jpg
        650SF
        http://s910.photobucket.com/albums/a...t=DSCF2647.jpg
        XS1100SG Project bike
        http://s910.photobucket.com/albums/a...t=DSCF3034.jpg

        Comment


        • #5
          Correct, the grey isn't as bad as you thought. Its the green that should cause worry.
          '78 E "Stormbringer"

          Purrs like a kitten, roars like a lion, runs like a gazelle (being chased by a cheetah).

          pics http://s1209.photobucket.com/albums/...tormbringer45/

          Comment

          Working...
          X