Announcement

Collapse
No announcement yet.

dual pod filters

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dual pod filters

    anyone know where i can get some
    dual pod filters, ive tried searching ebay
    and the net without success.
    tia.
    pete


    new owner of
    08 gen2 hayabusa


    former owner
    1981 xs1100 RH (aus) (5N5)
    zrx carbs
    18mm float height
    145 main jets
    38 pilots
    slide needle shimmed .5mm washer
    fitted with v/stax and uni pod filters

    [url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]

  • #2
    found them,

    K&N filter rc4240
    if any1 is interested.
    pete


    new owner of
    08 gen2 hayabusa


    former owner
    1981 xs1100 RH (aus) (5N5)
    zrx carbs
    18mm float height
    145 main jets
    38 pilots
    slide needle shimmed .5mm washer
    fitted with v/stax and uni pod filters

    [url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]

    Comment


    • #3
      link? or pic? 2 pods would look better than 4 imo....cant find them on web eather....is it the squarish looking one? is the spacing correct for the carbs?
      _____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)

      1982 gs1100e "all business" cafe project
      1980 gs1000g "stock"
      1982 honda express "stretched 10 inch(my daughters scooter)
      2008 jmstar 150cc Chinese scooter ( wife's bike)

      Comment


      • #4
        Originally posted by lee_dutcher View Post
        link? or pic? 2 pods would look better than 4 imo....cant find them on web eather....is it the squarish looking one? is the spacing correct for the carbs?
        Just did a google search and they came up with a list. Here is a few.

        http://www.amazon.com/RC-4240-Univer.../dp/B000E7BT7M

        http://www.jegs.com/i/K%26N/599/RC-4240/10002/-1?CT=999

        http://shop.advanceautoparts.com/web...i_sku=17401235
        Nathan
        KD9ARL

        μολὼν λαβέ

        1978 XS1100E
        K&N Filter
        #45 pilot Jet, #137.5 Main Jet
        OEM Exhaust
        ATK Fork Brace
        LED Dash lights
        Ammeter, Oil Pressure, Oil Temp, and Volt Meters

        Green Monster Coils
        SS Brake Lines
        Vision 550 Auto Tensioner

        In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

        Theodore Roosevelt

        Comment


        • #5
          figured they were the "lunchbox" kind....would look neet but is there e ough room and clearance for 2 of them?
          _____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)

          1982 gs1100e "all business" cafe project
          1980 gs1000g "stock"
          1982 honda express "stretched 10 inch(my daughters scooter)
          2008 jmstar 150cc Chinese scooter ( wife's bike)

          Comment


          • #6
            there should be enuff room, but i havent bought
            them so dont know for sure,
            i wanted to use these for the zrx carbs i have fitted, (similar spacing)
            these have the vent hoses similar to the early model
            mikunis,
            these filters have a hole for the vent hoses to go into,
            so by using these im hoping to get a little bit more oompf
            from under 3000rpm.
            pete


            new owner of
            08 gen2 hayabusa


            former owner
            1981 xs1100 RH (aus) (5N5)
            zrx carbs
            18mm float height
            145 main jets
            38 pilots
            slide needle shimmed .5mm washer
            fitted with v/stax and uni pod filters

            [url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]

            Comment


            • #7
              I remember seeing them, here's a picture from this thread:
              http://www.xs11.com/forum/showthread...light=dual+pod



              T.C.
              T. C. Gresham
              81SH "Godzilla" . . .1179cc super-rat.
              79SF "The Teacher" . . .basket case!
              History shows again and again,
              How nature points out the folly of men!

              Comment


              • #8
                thanx for posting TC,
                i noticed garry bought a set but havent seen him
                post on here for a while, he quoted part number RC3510
                i thought it was rc4240, they were exactly the same size
                so not to sure what the differences are, also noticed in that
                pic it was fitted to the early model carbs, wonder if they attached
                the vents to the air intakes?

                was about to purchase them, but they dont ship outside the us,
                and the one that did ship wanted $150 for shipping.
                pete


                new owner of
                08 gen2 hayabusa


                former owner
                1981 xs1100 RH (aus) (5N5)
                zrx carbs
                18mm float height
                145 main jets
                38 pilots
                slide needle shimmed .5mm washer
                fitted with v/stax and uni pod filters

                [url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]

                Comment

                Working...
                X