Tweet
Can any of you guys tell me if there is a difference in the cams (ie lobe height)in any of the models the P.O. snapped the camchain and replaced the cams i guess the intake lobe was wiped. anyway the bike has never run right
-
-
The 78-79 use their own type of cam and the 80-82, their own. The actual specs should be in the FSM.2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮ -
Info is on page 55 of Clymers for the 79SF cams, HTH.2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮Comment
-
I have two sets of cams, all in perfect condition. Both sets from 1979 bikes. Going cheap + postage.... Let me know if you want some....
XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
IIRC, the early model cams are stamped 2H7 on them and the later models have 3H? on them. This would help you identify the cams you have anyway.Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750Comment
-
im not finding any stamps on my cam beside the IN and EX and a 9S on the exhaust and 1P on the intake???Comment
Comment