Yep, I had the Motion Pro cheap sticks, they all cracked from the heat hanging too close to the engine. The cheap JCW guages work ok, but need to be calibrated with another guage, I use a Mity Vac. Setting them all to zero doesn't cut it.
Announcement
Collapse
No announcement yet.
Carb sync tool
Collapse
X
-
2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮
Comment
-
The Morgan carbtunes will cost about a hundred bucks shipped to you with the pouch. It has no mercury but has steel sliders instead. They are great. It will take ten days to get here from the UK. They are rebuildable if anything goes wrong and can be taken apart to clean if needed. If one wants the colortune is available from them as well. They bundle them all together for some money savings as well. If you can afford them they are simply the best way to go.
http://www.carbtune.com/2-79 XS1100 SF
2-78 XS1100 E Best bike Ever
80 XS 1100 SG Big bore kit but not fully running yet.
Couple of more parts bikes of which 2 more will live!
Comment
-
What happened to the Mercury? It went to the boneyard with the Fords and Chevys. Actually, it all goes to the same place as the Asbestos they remove from all those places. After they wear their space suits and was it all down carefully, and put it in those double wrapped bags that get marked with red tape and stuff, they carefully take it to the dump where it gets tossed in the same hole as your Krispy Kreme donut box from last week.
All this big worries about stuff. Funny thing about Asbestos is, the readings taken on the average city street corner about rush hour are higher than inside any abatement project.Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750
Comment
Comment