Tweet
now there working, now there not,
now there working, now there not.
now there working, now there not.
-
pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
[url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url] -
Are they working now? How bout now? Maybe now? Now are they working?2-79 XS1100 SF
2-78 XS1100 E Best bike Ever
80 XS 1100 SG Big bore kit but not fully running yet.
Couple of more parts bikes of which 2 more will live! -
mine dont work either. maybe someone else will chime in about your (and mine) problem... but seems for you you have a bad connection somewhere. go through the connections and clean them well and then check your grounds as well. after that if they still dont work maybe flasher?_____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)Comment
-
Flasher. Good luck finding an O.E. version that will work with the auto cancel feature.
'78 E "Stormbringer"
Purrs like a kitten, roars like a lion, runs like a gazelle (being chased by a cheetah).
pics http://s1209.photobucket.com/albums/...tormbringer45/Comment
-
Self canceler can cause the same..........working........not working..........working........81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.Comment
-
Also if you have the 4 ways, the switch for those can have the solder joints come apart and cause exactly that type of problem. If it's the problem you can open up the switch and you will find loose wires, just clean up the connectors and solder them all back on (and likely do this with ALL of them even if they seem ok) and put it back together and if you did it right everything will be fine again.Cy
1980 XS1100G (Brutus) w/81H Engine
Duplicolor Mirage Paint Job (Purple/Green)
Vetter Windjammer IV
Vetter hard bags & Trunk
OEM Luggage Rack
Jardine Spaghetti 4-2 exhaust system
Spade Fuse Box
Turn Signal Auto Cancel Mod
750 FD Mod
TC Spin on Oil Filter Adapter (temp removed)
XJ1100 Front Footpegs
XJ1100 Shocks
I was always taught to respect my elders, but it keeps getting harder to find one.Comment
-
Ummm, they're blinkers... Can't see the problem...
1980 SG. (Sold - waiting on replacement)
2000 XJR1300. The Real modern XS11. Others are just pretenders.
Woman (well, my wife anyway) are always on Transmit and never Receive.
"A man should look for what is, and not for what he thinks should be" Albert Einstien.Comment
-
sorry lee,
i was only joking,
theres nothing wrong with my blinkers. lol
pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
[url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]Comment
-
ha ha ha... i got mine working it was the switch... so i just picked up a "universal one" ans wired it up...works good
_____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)Comment
-
Unless the parts are physically broken, you can repair the OEM switch. There are several contact points that get corroded and a few solder points that may need to be re-soldered. Once you get it apart and cleaned, lube it with dielectric grease, and it should work just fine.Originally posted by lee_dutcher View Postha ha ha... i got mine working it was the switch... so i just picked up a "universal one" ans wired it up...works good
Of course, if you are just gonna toss the OEM switch, I'd be happy to take it off your hands!
1980 XS850SG - Sold
1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).
Whether you think you can, or you think you cannot - You're right.
-H. FordComment
Comment