Idle Mixture screws...Where to buy

[tcoop]

After cleaning my carbs yesterday I found the three tips had broken off and are stuck. The bile runs rich and will not Idle with out the emulation opened slightly. I will be taking then back off to freeze and remove the stuck tips. I did a search but could not see any post on where to get new tips. I don't need a complete kit just the Idle mixture screws. Any help would be appreciated.


Thanks in advance

Ty

[tcoop]

Sorry,I didn't put which bike this was for. This is for the 78 standard.

[DGXSER]

You can check at Mikes XS he has them. Also message Goergefix on ebay. He sells kits but will also sell individual parts.

[Toolmaker Tim]

Mikes XS Idle Screws

Which ones are the correct ones? The only ones that look correct are listed for the 38mm carbs. Am I looking in the right place, or are they the right ones listed under the 38mm carbs?

[bikerphil]

I don't think MikesXS has the proper mixture screws for the early BS-34-II type carbs.

[Toolmaker Tim]

Idle Screws

Thanks Phil, thats what I thought, but I was hoping. Like Ty, I need a set also.

[bikerphil]

I need a set also.

I'm not sure where you can get them cheaply. Last time I needed some, I got them from Bikebandit, not cheap though. If anyone knows of a supplier for these at a reasonable price, please share.

[latexeses]

Anyone dealt with this outfit???

http://www.carbkitscapital.com/carb_...a&model=XS1100

[Aches n Pains]

Georgefix

Here's one way.
http://cgi.ebay.com/ebaymotors/4-YAM...Q5fAccessories

Drop George a line and he will probably sell you just the needles.

Doug

[tcoop]

I had the wrong spelling for GeorgeFix and could not find him on ebay. Thanks for the post.

[yamahansolo]

I had this problem a few months back and someone swore that the mikes ones were correct. However I bought 3 used for 17 bucks.

[strom]

I got mine from my Yamaha dealer... but this was 8 years ago...