Announcement

Collapse
No announcement yet.

Idle Mixture screws...Where to buy

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Idle Mixture screws...Where to buy

    After cleaning my carbs yesterday I found the three tips had broken off and are stuck. The bile runs rich and will not Idle with out the emulation opened slightly. I will be taking then back off to freeze and remove the stuck tips. I did a search but could not see any post on where to get new tips. I don't need a complete kit just the Idle mixture screws. Any help would be appreciated.


    Thanks in advance

    Ty
    Ty

    78 XS1100E - Now in Minnesota
    80 XS1100LG - The Punisher
    82 XJ1100 - Current project - The Twins
    82 XJ1100 - Wife's Bike - The Twins
    82 XJ1100 - Daughter's Bike
    72 Suzuki TS125 - Daughter's Bike
    72 Yamaha Mini JT2 - Youngest Daughter's bike (She wants a bigger one now)
    Tags: None
  • #2
    Sorry,I didn't put which bike this was for. This is for the 78 standard.
    Ty

    78 XS1100E - Now in Minnesota
    80 XS1100LG - The Punisher
    82 XJ1100 - Current project - The Twins
    82 XJ1100 - Wife's Bike - The Twins
    82 XJ1100 - Daughter's Bike
    72 Suzuki TS125 - Daughter's Bike
    72 Yamaha Mini JT2 - Youngest Daughter's bike (She wants a bigger one now)

    Comment

    • #3
      You can check at Mikes XS he has them. Also message Goergefix on ebay. He sells kits but will also sell individual parts.
      Life is what happens while your planning everything else!

      When your work speaks for itself, don't interrupt.

      81 XS1100 Special - Humpty Dumpty
      80 XS1100 Special - Project Resurrection


      Previously owned
      93 GSX600F
      80 XS1100 Special - Ruby
      81 XS1100 Special
      81 CB750 C
      80 CB750 C
      78 XS750

      Comment

      • #4
        Mikes XS Idle Screws

        Which ones are the correct ones? The only ones that look correct are listed for the 38mm carbs. Am I looking in the right place, or are they the right ones listed under the 38mm carbs?
        1979XS1100SF
        K&N's and drilled airbox
        Jardine 4in1
        Dunlop Elite 3's
        JBM slide diaphragms
        142.5 main jets
        45 pilot jets
        T.C.'s fusebox & SOFA
        750/850 FD mod.
        XV 920 Needle Mod.
        Mike's XS plastic floats set at 26mm
        Venture Cam Chain Tensioner

        Comment

        • #5
          I don't think MikesXS has the proper mixture screws for the early BS-34-II type carbs.
          2H7 (79) owned since '89
          3H3 owned since '06

          "If it ain't broke, modify it"

          ☮

          Comment

          • #6
            Idle Screws

            Thanks Phil, thats what I thought, but I was hoping. Like Ty, I need a set also.
            1979XS1100SF
            K&N's and drilled airbox
            Jardine 4in1
            Dunlop Elite 3's
            JBM slide diaphragms
            142.5 main jets
            45 pilot jets
            T.C.'s fusebox & SOFA
            750/850 FD mod.
            XV 920 Needle Mod.
            Mike's XS plastic floats set at 26mm
            Venture Cam Chain Tensioner

            Comment

            • #7
              Originally posted by Toolmaker Tim View Post
              I need a set also.
              I'm not sure where you can get them cheaply. Last time I needed some, I got them from Bikebandit, not cheap though. If anyone knows of a supplier for these at a reasonable price, please share.
              2H7 (79) owned since '89
              3H3 owned since '06

              "If it ain't broke, modify it"

              ☮

              Comment

              • #8
                Anyone dealt with this outfit???

                http://www.carbkitscapital.com/carb_...a&model=XS1100
                RIP Whiskers (Shop Boss) 25+yrs

                "It doesn't hurt until you find out no one is looking"

                Everything on hold...

                Comment

                • #9
                  Georgefix

                  Here's one way.
                  http://cgi.ebay.com/ebaymotors/4-YAM...Q5fAccessories

                  Drop George a line and he will probably sell you just the needles.

                  Doug
                  1995 KZ100P
                  Pods, jets, pipes, cam adjuster, oil cooler

                  1977 Ironhead - custom build
                  Hot engine, custom frame, KZ front and rear, high torque starter, alternator conversion, Progressive shocks, Thunderheart wiring, Dyna ignition, oil cooler, Dakota Digital instruments, etc.

                  Sold all my XS's to Eastcoaster but still love to keep up with you guys. This is the best cycle forum on the web.

                  Comment

                  • #10
                    I had the wrong spelling for GeorgeFix and could not find him on ebay. Thanks for the post.
                    Ty

                    78 XS1100E - Now in Minnesota
                    80 XS1100LG - The Punisher
                    82 XJ1100 - Current project - The Twins
                    82 XJ1100 - Wife's Bike - The Twins
                    82 XJ1100 - Daughter's Bike
                    72 Suzuki TS125 - Daughter's Bike
                    72 Yamaha Mini JT2 - Youngest Daughter's bike (She wants a bigger one now)

                    Comment

                    • #11
                      I had this problem a few months back and someone swore that the mikes ones were correct. However I bought 3 used for 17 bucks.
                      " She'll make point five past lightspeed. She may not look like much, but she's got it where it counts, kid. I've made a lot of special modifications myself. "

                      79 xs11 standard
                      xs pods, Kerker 4-1, zrx1200r carbs mikesxs coils 35k voltz of power!!!
                      8mm msd wires
                      tkat fork brace...
                      Fox shocks...
                      mikes650 front fender
                      led's gallore...
                      renthal bars
                      gold valve emulators
                      vmax tensioner
                      Rifle fairing

                      Comment

                      • #12
                        I got mine from my Yamaha dealer... but this was 8 years ago...
                        If it doesn't have an engine, it's not a sport, it's only a game.
                        (stole that one from I-dont-know-who)

                        Comment

                        Previous template Next
                        Working...
                        X