So i have put the engine back into the bike and reconnected things to the best of my ability but it seems that I have forgotten where the last thing connects to. Its the very long wire coming off from what I believe is the oil level sensor underneath the bike near the oil pan and shift lever. Where does this wire go?!?
Also I installed my brand new YUASA battery and tried to get the bike started, but it wouldn't go. I have gas flowing, but didnt have enough time to check for spark because I had to go to work. While cranking it over, it sounded like at least one was firing, which gives me some hope.
If you know where the wire to the oil level sensor on my XJ goes, please describe as best as you can, or take pictures. Thanks!
Also I installed my brand new YUASA battery and tried to get the bike started, but it wouldn't go. I have gas flowing, but didnt have enough time to check for spark because I had to go to work. While cranking it over, it sounded like at least one was firing, which gives me some hope.
If you know where the wire to the oil level sensor on my XJ goes, please describe as best as you can, or take pictures. Thanks!
Comment