Tweet
The photo shows a butterfly on the end of the carb towards the cylinders. The slide is in the middle of the carb body, you would only see it from this angle if the butterfly was open.
-
Ken Talbot -
The butterflies are at the engine side of the carb; when installed, you see the slides. Push the slide up with your finger and you'll see 'em...Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
lol...i gotch ya_____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)Comment
-
well i looks>at it and saw the octy was hooked up to that port so if the p/u is suppose to go there were douse the octy vac go_____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)Comment
-
The octy goes to the spigot on the rubber boot right up against the head.Originally posted by lee_dutcher View Post
Doesn't really matter which one, but generally is on the same intake line as the vacuum advance.Cy
1980 XS1100G (Brutus) w/81H Engine
Duplicolor Mirage Paint Job (Purple/Green)
Vetter Windjammer IV
Vetter hard bags & Trunk
OEM Luggage Rack
Jardine Spaghetti 4-2 exhaust system
Spade Fuse Box
Turn Signal Auto Cancel Mod
750 FD Mod
TC Spin on Oil Filter Adapter (temp removed)
XJ1100 Front Footpegs
XJ1100 Shocks
I was always taught to respect my elders, but it keeps getting harder to find one.Comment
-
ok so i just switched them around..ill find out tomorrow if that fixes my problem...because i am replacing the clutch and springs along with changing the oil and filter...oh and what size is that washer on the oil filter thing i seem to have ummm misplaced itOriginally posted by cywelchjr View Post_____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)Comment
-
2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮Comment
Comment