Choke idle speed?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tbell
    XSive
    • May 2010
    • 35
    • Oklahoma City

    #1

    Choke idle speed?

    Is it normal for the idle speed, at cold start with choke, to jump to around 4500 rpm? Seems kind of high to me. Idle speed is normal after warm up.

    Tom
  • tadtl1
    XSive
    • Mar 2010
    • 98
    • Auburn Mi

    #2
    too high?

    Hi,

    In this kind of weather, 80F, if fully choked mine will shoot up, not quite that high, but much higher than say when the temp is 50F. Just back off the choke till it goes to a normal speed.
    80 MNS , Georgefix pods , crossed fuel lines, no octy, inline filters, Daytona handlebar, custom seat, Hardley 19 muffs

    Comment

    • CatatonicBug
      Master of XSology
      • Oct 2008
      • 6117
      • Clinton, UT

      #3
      Yep. Perfectly normal. Pull the choke, and it should start, then gradually climb to the point that you think it's going to explode. Then, you bump the choke in one notch, and it should drop the RPMs again, and gradually climb again. Bump the choke in all the way, and it should drop to normal (1100) rpm.
      1980 XS850SG - Sold
      1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
      Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
      Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).

      Whether you think you can, or you think you cannot - You're right.
      -H. Ford

      Comment

      • Tbell
        XSive
        • May 2010
        • 35
        • Oklahoma City

        #4
        Thanks guys! Just seemed awfully high to me.

        Comment

        • ambidextrous
          XSive
          • Apr 2007
          • 92
          • River Grove, IL

          #5
          one night i pulled the choke fully out, started her up, ran back into the house and i thought i was gonna blow all the rods and pistons out of the motor

          it scared the heck out of me

          now, i start her full choke, wait just a few seconds, then let her warm up the rest of the way one notch out

          once im ready to pull out, i click the choke all the way in and shes good to go from there
          1980 XS1100SG - almost done

          Comment

          Working...