So I've been working on getting my tune set. After a short ride and some idol time to get up to temp. pipe 1 and 2 were cold. I leaned the mixture out a little bit and went for a ride. The temps came up a bit but no where near pipes 3 and 4. I pulled plug number 1 and it was BLACK. it looks like a combo of oil and fuel. Smells a little like fuel too. Also I've got some oil building on on the outside of the muffler from the small gap between the muffler and the collector. Do I need to double check my valve clearances or am I looking at a re-ring project this year.
not looking forward to tearing my head apart again but I really dont want to have to hone and re ring my motor.

Comment