Tweet
Hey guys, ive searched this site, the uk site as well as Google and Yahoo! with no luck, im looking to put slip on bars on my special and I need to know the fork diammeter under the upper headlight mounting sleeve. Im looking for a size clipon to by (40mm, 55mm) etc, If someone has a quick response that would be awesome, Thanks
-
XS11.Com resident Black Sheep -
The diameter of the fork upper tubes is 37MM, top to bottom, they have no taper under the headlight mounts.Last edited by bikerphil; 06-09-2010, 06:15 AM.2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮ -
be aware that clip-ons may hit the tank when you turn...I've not tried them but seen it mentioned.1979 xs1100 Special -
Stock air box/K&N Filter, MAC 4-2 exhaust, Bad-Boy Air horn, TC fuse box, Windshield, Soft bags, Vetter Fairing, Blinkers->Run/Turn/Brake Lights, Headlight Modulator, hard wire GPS power
Short Stack - 1981 xs1100 Standard - lowered for SWMBO.
My Bike:Originally posted by fredintoon
[link is broken]Comment
-
ry the ones off of the early cbr600 models (F1 or Hurricane) as they will fit the forks!Comment
-
You could also check out the Kawasaki GPZ750 bars from '83 - 87. Same diameter and have adjustable angle (up / down)
also, you could slide the fork tube up a bit through the top clamps and perch the bars on top of the triple clamp to help clear the tank.Last edited by Eveready1100; 10-26-2010, 04:30 AM.79 SF Special W/ Stock all original motor @ 384,000klms
Stock exhaust, stock airbox, XJ sump, 78E carbs, Xs1100RH seat, Bosch superhorns, 5/8ths front M/c, braided lines, sintered SBS pads, drilled discs, progressive springs, 8" 50w HID headlight 4300K, 2 x 50w HID spiral driving lights, KONI shocks, Spade fuse box
*Touring mode - Plexistar 2 screen, Gearsack rack & bag & saddlebags, homebuilt towbar
*"The Keg"- UC torana hubs, XS11 discs, Tokico 4 spot calipersComment
Comment