Tweet
i have to figure out the best way to fab something to hang this with. i already had to cut the ears down on it because the freakin kerker is too wide for the fairing to fit. i still need to trim a little more off. any ideas.
-
" She'll make point five past lightspeed. She may not look like much, but she's got it where it counts, kid. I've made a lot of special modifications myself. "
79 xs11 standard
xs pods, Kerker 4-1, zrx1200r carbs mikesxs coils 35k voltz of power!!!
8mm msd wires
tkat fork brace...
Fox shocks...
mikes650 front fender
led's gallore...
renthal bars
gold valve emulators
vmax tensioner
Rifle fairing -
thats going to look nice when
you finally get it mounted.
could you have two brackets come off the frame in front,
with a plate coming across to attach the two together then
attach it to the fairing, then a cpl of small brackets attached
under the frame and near the end of the fairing.
hope that makes sense
pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
[url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url] -
i have 2 exhaust type clamps that i bought to attatch to the crash bars that should take care of the lower sides but i think i will need a couple more somewhere???
i know ..... duct tape!!" She'll make point five past lightspeed. She may not look like much, but she's got it where it counts, kid. I've made a lot of special modifications myself. "
79 xs11 standard
xs pods, Kerker 4-1, zrx1200r carbs mikesxs coils 35k voltz of power!!!
8mm msd wires
tkat fork brace...
Fox shocks...
mikes650 front fender
led's gallore...
renthal bars
gold valve emulators
vmax tensioner
Rifle fairingComment
-
Looks nice, where did you get it from? How much?'79 XS11 F
Stock except K&N
'79 XS11 SF
Stock, no title.
'84 Chevy K-10 "Big Blue"
GM 350, Muncie SM465, NP208, GM 10 Bolt with 3.42gears turnin 31x10.5 Baja Claws
"What they do have is an implacable, unrelenting presence and movement that bespeaks massive power lurking behind paint and chrome. They don't wail like a screeching ninja, the don't rumble like a harley. They just growl like a spactic, stressed out badger waiting to rip your face off and eat your soul." Trainzz~RIP~Comment
-
Very Bob Jones-esque. I wonder if you could find a picture of one of his machines to get a better idea on the mounting - JAT.I think I have a loose screw behind the handlebars.
'79 XS11 Standard, Jardine 4/1, Dyna DC1-1 Coils, 145 mains, 45 pilots, plastic floats - 25.7mm, XV920 fuel valves, inline fuel filters, speed bleeders, Mikes XS pods, spade-type fuse block, fork brace, progressive fork springs/shocks, manual petcocks, 750 FD, Venture cam chain tensioner, SS brake linesComment
-
i looked at the bob jones ones closely... unfortuanitly they don't have kerkers and they sit up closer to the bike. my kerker is too wide where the fairing goes in." She'll make point five past lightspeed. She may not look like much, but she's got it where it counts, kid. I've made a lot of special modifications myself. "
79 xs11 standard
xs pods, Kerker 4-1, zrx1200r carbs mikesxs coils 35k voltz of power!!!
8mm msd wires
tkat fork brace...
Fox shocks...
mikes650 front fender
led's gallore...
renthal bars
gold valve emulators
vmax tensioner
Rifle fairingComment
-
Hi 'solo,Originally posted by yamahansolo View Post
duct tape is OK for mock-ups but don't stand up for the long haul.
I'd locally reinforce the scoop in 4 places with pop-riveted on 20ga aluminum sheet with slots through for hose clamps. If the hose clamps will fit direct to the crashbar, fine. If not, run struts out.Fred Hill, S'toon
XS11SG with Spirit of America sidecar
"The Flying Pumpkin"Comment
Comment