I don't like what they were doing to my rotors, and they turned out to be very noisy. When I changed my forks because of blown seals and couldn't get them apart (they still won't come apart, but I swear they WILL eventually
) I put my old ones back on as they still have a few thousand miles of life left in them (I like to change them before they get to the "have to change them now" point and keep them around as spares just in case. I still have the stupid sintered pads on the back, but they went on because the back was down to the backing plate, so no spares there. I'll be changing them out as soon as I can wedge them into the budget, and I'll be changing all the pads on the bike at once, and the pyramid ones on the back go in the can just like the front ones did. I don't figure I'll be buying any more parts from those guys, I'm not please with the stuff they are passing off, even if it was in the past. If I end up replacing my rotors I'll go for the EBC ones, a little less rotating mass and unsprung weight, but I think I'm fine for the forseeable future. (barring me doing something stupid that damages the rotors
)


Comment