If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm confused on the correct amt of fork oil to refil... is it
8.150z.(241 cc) or 7.1oz.(210cc) ??
Hi Matt,
from Clymer's 1980-1981 suppliment:-
'80 Standards use 8.15oz (241cc) while '80 Specials & Midnights use 7.1oz (210cc)
FYI; from Clymer's manual:-
'78 & '79 Standards use 7.17oz (212cc) while '79 Specials use 7.61oz (225cc)
Fred Hill, S'toon
XS11SG with Spirit of America sidecar
"The Flying Pumpkin"
Thanks! I guessed right. Had an interesting problem that developed once the fork oil was in & reinstalled the handlebars. The front brake lever went all the way in without any resistance at all! The ft wheel was also just reinstalled with a new Dunlop Elite 3 tire & both calipers were removed to fit it between the forks. The ft master was rebuilt just one month ago & was working great. It took a few rides up the block before I got some restored lever feel, and then I had to rebleed both ft calipers to get back to full normal.
Comment