Tweet
can anyone please tell me the correct inlet valve clearance for this model. its got xs1100r on comp. plate, but apparently is an "RH", according to previous threads. serial no. 5n5.....etc. have got them set at .11-.15 currently and suspect this may be incorrect (the manual i have stated this for models past 1980). cheers fellas.
-
-
Hey Hazza,
Nice to see another aussie on board,
Inlet valves are 4 - 6 thou
Exhaust valves are 8 - 10 thou,
The 'H' represents the year of the bike, that being an 81.
The 'R' is the model.
Hope this helps.pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
[url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url] -
That's right
for valve clearances
. Had two RH's they go a bit better than standard versions. 
Comment
Comment