My plan with my new XS11 project is to see if the motor runs before I do anything else. I have no spark, but I haven't brought home the parts bike that has the better ignition parts yet. So I've been messing with the other electrics.
So far everything works, except the headlight. I have blinkers flash, the taillight works, the horn beeps and the brake lights work. The starter turns the motor, albeit with no spakr as yet. But the headlight doesn't work on high or low. I have juice across the headlight fuse, but then it just goes away. I took the left hand switch apart and cleaned the contacts, but that really was irrelevant since no juice is getting in there. I switched out the reserve lighting unit just because I had another, but that was also irrelevant because I could find no live wire there either. I am achieving some very clean contacts anyway.
Which component can be bad and knock out the whole headlight circuit?
I know if could be a bad wire somewhere inside the harness, but I would prefer to try everything else before I start unwinding all those miles fo electrical tape. I will worry about that after it runs when I start cosmetic work.
Thanks, in advance, for any advice.
Patrick
So far everything works, except the headlight. I have blinkers flash, the taillight works, the horn beeps and the brake lights work. The starter turns the motor, albeit with no spakr as yet. But the headlight doesn't work on high or low. I have juice across the headlight fuse, but then it just goes away. I took the left hand switch apart and cleaned the contacts, but that really was irrelevant since no juice is getting in there. I switched out the reserve lighting unit just because I had another, but that was also irrelevant because I could find no live wire there either. I am achieving some very clean contacts anyway.
Which component can be bad and knock out the whole headlight circuit?
I know if could be a bad wire somewhere inside the harness, but I would prefer to try everything else before I start unwinding all those miles fo electrical tape. I will worry about that after it runs when I start cosmetic work.
Thanks, in advance, for any advice.
Patrick
Comment