Yeah, just remove the nut and flat washer.
Clean up around the lube holes and stick the larger washer down with RTV, plugging the holes in the process.
Tighten up the locknut.
I ran mine up to 70 ft/lb, but YMMV. I have no recommendation there.
You're done with that part.
Don't take out the screws and the pinion won't come out.
Clean up around the lube holes and stick the larger washer down with RTV, plugging the holes in the process.
Tighten up the locknut.
I ran mine up to 70 ft/lb, but YMMV. I have no recommendation there.
You're done with that part.
Don't take out the screws and the pinion won't come out.
Comment