If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm searching for a replacement air filter for my '80SG. I found a K&N for $48.00 at Bike Bandit and a filter at Parts'n'more for $18.00. Does anyone know the difference?
Thanks,
joe
The parts n more filter was too tall for my air housing. I ended up having to go with a Uni filter.
I think I still have the parts n more filter somewhere. If you IM me your address I will send it to you for free (assuming you don't live in some distant third world country).
1980 XS1100 Standard "Touring"
Fairing, Trunk, and Bags
850 FD
Fork Brace
Progressive Front Springs
Engine Guards w/Foot Pegs
Oil Cooler
Throttle Lock
Uni Air Filter in Airbox
The parts n more filter was too tall for my air housing. I ended up having to go with a Uni filter.
If you have a 78 or a 79 airbox, the unifilter van get caught-up in the box's keeper pins, making them impossible to remove. That foam is TOUGH stuff. I had to do surgery with i Ginsoo knife and a prybar to remove mine.
Skids (Sid Hansen)
Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.
I've had a UNI filter catch fire when the engine backfired. I didn't realize it until months later when I opened up the air box. K+N's only for me now. Ah, another air filter thread.
The parts n more filter was too tall for my air housing. I ended up having to go with a Uni filter.
I think I still have the parts n more filter somewhere. If you IM me your address I will send it to you for free (assuming you don't live in some distant third world country).
Boss,
I got the filter a couple of days ago. Sorry for the delay in letting you know
Thanks again and I will pass the favor forward.
joe
I have the same problem with the parts n more filter on my 78 E. Its just too tall. Gonna have to find another one somewhere, but don't want to dpend the $$ on the K&N.
I ran into the same problem with the partsnmore filter. But after comparing the height to the old filter I found it was the same except for the foam gasket on the new filter. Scraped it off and have had it in for almost 3 years.
Comment