If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The first option is to go to the nearest salvage yard, and see if they have a used right hand switch assembly from any XS model, 400-1100. The button is easy to remove and replace.
The next option is to order one from mikesxs.com. The starter and horn buttons are the same.
The first option is to go to the nearest salvage yard, and see if they have a used right hand switch assembly from any XS model, 400-1100. The button is easy to remove and replace.
The next option is to order one from mikesxs.com. The starter and horn buttons are the same.
John, thanks for the fast reply! I figured out what'll work in the short term. I removed my key from the ignition switch, crammed it down the starter (now) hole and she sparked right up! Good thing I can remove my key while in the "on" position. Thanks again!
Good thing I can remove my key while in the "on" position. Thanks again!
Looks like you could use a new main switch too!
1980 XS850SG - Sold
1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).
Whether you think you can, or you think you cannot - You're right.
-H. Ford
John, thanks for the fast reply! I figured out what'll work in the short term. I removed my key from the ignition switch, crammed it down the starter (now) hole and she sparked right up! Good thing I can remove my key while in the "on" position. Thanks again!
You can also get new switch buttons off of ebay, they are on there regularly. I however am stuck with the earlier options since the PO completely removed all signs of the start button, wiring and all and wired it to a push button in the fairing. Just not much of a priority since the button on the fairing works pretty well.
Is the spring still there?I have an extra button if you want.All i need is an address.I have a new right side control but it is brand new.
i could use that button i am missing mine to and i do still have the spring in mine just no button
1980 xs 11 special
The motor vehicle action sequences depicted in this film are dangerous. All stunts were performed in controlled environments with professionally trained stunt crews on closed roads. No attempts should be made to duplicate any action,driving or car play scenes herein portrayed.
Comment