Tweet
Who needs a left rear wheel bearing?
Over the past few weeks, I've been able to find a dozen or so original NA5904 bearings. The supplier I'm working with is willing to do the legwork to find the leftover stock and bring them in from other distributors, but eventually the supply will dry up. The purpose of this poll is to determine how many of you want one or more of the bearings so we can grab as many as we can before they go away forever.
-
23186.96%20213.04%330.00%040.00%0The poll is expired.
-
Any idea on the cost Randy?
and many thanks for getting this together... should save a few people more than a few headaches...81 SH Something Special
81 frame, 80 tank and side covers, 79 tail light and carbs, 78 engine, 750 final drive mod, Geezer rec/reg, 140 mains, LH wheels
☺
79 SF MEAUQABEAUXS
81SH Nor'eas tah (Old Red)
80 LG Black Magic
78 E Standard Practice
James 3:17
If I can make at least one person smile, or pee their pants a little, or maybe spit out their drink; then my day is not wasted.
“Alis Volat Propriis”
Yamaha XS 1100 Classic
For those on FB -
$50 including shipping in North America.Comment
-
Randy...put me down for one. Hate to have a $50 bearing be the death of Thunderstruck.Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750Comment
-
I hate to spend that much $ but it's one of those things I'll be glad to have when I need it. Put me down for one as well once you get them in. Thanks!1980 XS11SG
Dunlop elite 3's, progressive fork springs, tkat brace
Stock motor, airbox, carbs, exhaust
ratted out, mean, and nastyComment
-
I would take one Randy.80 SG XS1100
14 Victory Cross CountryComment
-
Two Please.
I'll take one for each bike. Two please. Thx RickI May Be Crazy, But I Have A Good Time.
Northern Gypsy - 2010 Kawasaki Concours 14 ABS - Daily riderComment
-
Thanks for doing the legwork on this, Randy. I better get on the futures list for two, even knowing that will only look after half of our fleet. If I put that many miles on even two of the four bikes over the next 20 or 30 years, I'll probably need more than a couple of bearings for the 20 or 30 years after that. Let's see, that should make it about 2030 or 2040...
Ken TalbotComment
-
wheel bearing
If i have the spare bearing, may never need it, kinda like a spare tire and jack...............put me on your list for one too Randy.........good find!81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.Comment
-
Randy,
Put me down for one also. Thanks.LuckyEddie
1980 XS1100LG Midnight special
1982 XV750J Virago
1976 GL1000
1978 GL1000 Supercharged
1981 XV920RH (chain drive)Comment
-
One for me
Randy,
I'll take one. Thanks for all the work to get this setup.
Regards,
ChuckChuckster
'78 XS1100E
Money can't buy happiness, but it can get you an XS11 and that's a start.Comment
-
Im guessing these are h ard to find?
$50 for a bearing is crazy. There's nothing that inter changes?'80 XS 1100 Standard Comment
-
Randy, I'm in for one also.
Thanks,
LarryInventor of the YICS Eliminator. Want one? Get it here.
http://www.xs11.com/forum/showthread...399#post183399
If you're not riding, you're not living!
82 XJ1100
80 XS1100G (Project bike)
64 Yamaha YA-6
77 Suzuki TS-185
79 XS1100SF Built this one for a friend.
See it here... http://www.youtube.com/watch?v=cBYT4C9_6AcComment
-
Left Bearing
Randy, put me down for one, plz.
Thanks1980G Standard, Restored
Kerker 4 - 1
850 Rear End Mod
2-21 Flashing LED Arrays on either side of license plate for Brake Light Assist, 1100 Lumen Cree Aux Lights,
Progressive springs, Showa rear shocks
Automatic CCT
1980GH Special, Restored
Stock Exhaust, New Handlebars, 1" Spacer in Fork Springs, Automatic CCT, Showa Rear Shocks
'82 XJ1100 (Sold)
Automatic CCT, RC Engineering 4 X 1 Exhaust, K&N Pods, #50 Pilot Jets, YICS Eliminator. Sorely missed.Comment
-
Andy for a while it was thought they were extinct!! or to quote an XS11 term "made form unobtanium!!" It is actually quite the bearing, needle bearings, two piece IIRC, and yeah almost impossible to find. So...$50 may seem steep, but when it is down to that bearing and owning a newly confirmed parts bike!Originally posted by andysutt View Post
$50 seems reasonable!
Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750Comment
Comment