Tweet
i have a 79 standard with a full yamaha fairing. has anybody removed this and went to headlight and turnsignals on the fork. is it plug and play on electrical, what parts do i need to acquire any help would be appreciated.
-
-
It is plug and play on the electrical. you will need a headlight bucket, trim ring and headlight, the headlight mounting ears, headlight reflectors,front turn signals and the signal mounts that go on the forks.
HTH
PaulPaul
1983 XJ1100 Maxim
1979 XS1100 Standard
1980 XS1100 Special
I'm not a motorcycle mechanic but I play one on the internet.
-
fairing removal
do i have to remove the front forks....Comment
-
Not to remove the fairing or bracket. Unbolt the fairing from the bracket and then remove the bracket. If the headlight ears are not on the forks then you will have to remove the forks from the triple tree to install them.Paul
1983 XJ1100 Maxim
1979 XS1100 Standard
1980 XS1100 Special
I'm not a motorcycle mechanic but I play one on the internet.Comment
-
adleeman:
See the below posting for the manual on fairing.
http://www.xs11.com/forum/showthread...hlight=FairingComment
-
many thanx
thanx much that was very helpfulComment
Comment