Tweet
Can anyone tell me what the float height should be on a'80 XS1100LG? And at what points to measure from... Thanks Guys!!
1980 XS1100LG
1980 XS1100LG
-
1980 XS1100LG -
If it has the black plastic floats, float height for a 1980 XS1100LG should be
23.0 +-0.5mm (0.906 +- 0.020 in)
Regards,
Scott-- Scott
_____
♬
2004 ST1300A: No name... yet
1982 XJ1100J: "Baby" SS Brakes, '850 FD, ACCT
1980 XS1100G: "Columbo" SS Brakes, '850 FD, ACCT
1979 XS1100SF: "Bush" W.I.P.
1979 XS1100F: parts
2018 Heritage Softail Classic 117 FLHCS SE: "Nanuk" It's DEAD, it's not just resting. It is an EX cycle.
♬ -
Awesome! Thanks. Can you tell me if thats measured from the lip or the gasket base?1980 XS1100LGComment
-
that should be measured from the surface that the gasket sets on, so remove the gasket and measure from the flat that the gasket sits against.1979 xs1100 Special -
Stock air box/K&N Filter, MAC 4-2 exhaust, Bad-Boy Air horn, TC fuse box, Windshield, Soft bags, Vetter Fairing, Blinkers->Run/Turn/Brake Lights, Headlight Modulator, hard wire GPS power
Short Stack - 1981 xs1100 Standard - lowered for SWMBO.
My Bike:Originally posted by fredintoon
[link is broken]Comment
-
Thanks for the help!!! Much appreciated!1980 XS1100LGComment
Comment