Petcock parts

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • srwalters
    XSive
    • Jul 2008
    • 28
    • Nashville

    #1

    Petcock parts

    I had just ordered new o-rings (1J7-24534-00) and valves (16G-24523-00) is what they sent from America's motor sports.

    And they are way to big. On the paper Invoice it states "1981 xs1100 (3H3-24534-00-00) and (3H3-24523-00-00)"

    Does anyone have the correct number, or did they order the wrong year. I plan on taking them back tomorrow and want to have some ammo to explain the issue.

    Can anyone help? Parts are for my 1980 XS1100 Special
    1980 XS11SG/sf
  • TopCatGr58
    Administrator
    • Jul 2002
    • 12650
    • Portsmouth, Va.

    #2
    Hey SrWalters,

    The #'s that THEY say you needed ARE the correct #'s for an 81SH...Specials petcocks, O-ring and rubber valve!

    One of the parts you listed, the 1J7-##### is from an 81 STANDARD petcock, don't know the 16G-#####??????

    SO....are you sure you have a special, special tank with special petcocks? OR....do you have a Standard, which ARE different in design than the special???
    T.C.
    T. C. Gresham
    81SH "Godzilla" . . .1179cc super-rat.
    79SF "The Teacher" . . .basket case!
    History shows again and again,
    How nature points out the folly of men!

    Comment

    • srwalters
      XSive
      • Jul 2008
      • 28
      • Nashville

      #3
      The tank that I have has two petcocks with 4 settings, off,on, pri, and res.

      There is a left and right pet cock. Is this for a Special?
      1980 XS11SG/sf

      Comment

      • srwalters
        XSive
        • Jul 2008
        • 28
        • Nashville

        #4
        According to the Model # it is an SG. Starts with 3J6###
        1980 XS11SG/sf

        Comment

        • srwalters
          XSive
          • Jul 2008
          • 28
          • Nashville

          #5
          [IMG]000_0759[/IMG]
          1980 XS11SG/sf

          Comment

          • TopCatGr58
            Administrator
            • Jul 2002
            • 12650
            • Portsmouth, Va.

            #6
            Okay,

            THat sounds like a Special with 4 fuel settings, and the 79-81 all use the same parts in the petcocks!!

            3H3-24534-00-00 O-RING
            3H3-24523-00-00 VALVE

            So....if those parts are TOO BIG, then don't know what to tell you because they are the right parts #'s for the Specials petcocks for those parts!?
            T.C.
            T. C. Gresham
            81SH "Godzilla" . . .1179cc super-rat.
            79SF "The Teacher" . . .basket case!
            History shows again and again,
            How nature points out the folly of men!

            Comment

            • SFerinTEXAS
              XSive Maximus
              • Jun 2006
              • 876

              #7
              I have one torn down and the disc (valve} measures .90 inch on my dial mic. Mine is a 79 soecial but I am pressty sure they are the same.
              79SF
              XJ11
              78E

              Comment

              • SFerinTEXAS
                XSive Maximus
                • Jun 2006
                • 876

                #8
                PS I have grungy grey keyboard and poor eyesight. But I did use the BIG EYE on the mic dial
                79SF
                XJ11
                78E

                Comment

                Working...