Where's the throttle thread?

[xschop]

Anyways, does this throttle sleeve from the xs650 (mikes xs site)fit our XS11's?...Part #02-2465
http://www.mikesxs.net/mikesxs-chass...ategory_id=1.4

[bikerphil]

sleeve

Yes it does. I have one on my 79 Special.

[xschop]

unlike O.J.'s Glove

good news. Is there any slack (or too much) that you notice. This aftermarket one I have has too much for my style....chop

[bikerphil]

Play

It has a slight amount of play (rattle), but I think if it was any tighter it might bind. But I think you are right about the OEM. My Standard still has the original OEM, and there is a little less play. Could it have anything to do with the chrome thickness of the handlebars?

[mro]

throttle sleeve off 79F



This be what your looking for?


mro

[egsols]

It would appear that the grip assembly from yamaha is 2H7-26240-00-00 for both the 1100SF and 650SF so I would assume it would fit.

[xschop]

sleeve

NO, it fits nicely on the 'BUSA bars, but there is about 1/4 back return before it pulls the throttle at the carbs. I think Bikerphil cleared it up. I will get one from MIKESXS....MrO, That pic looks like an albino joystick from an old ATARI 2600 ....chop

[xschop]

MR-O

I PM'ed you. I will take you up on that deal....chop

[xschop]

MMMMM.....OEM

Definitly back to where it should be...just a tad rattle of slack before throttle....Thanks MrO. I also mic'd the stock one at the stop position and marked the aftermarket accordingly so I can run a stainless machine screw in the plastic for my next project...waste not, want not.....chop