R1 Monoshock Mod

[snowdog51]

r1

i'll get some pics my bracket gives a start
point with no weight on the bike of 13.5"
man what a ride thanks to you for turning me on to it.
as ever bill

[xschop]

ride height

ride height can be adjusted by the top bracket. I am 6'2" so the highest point is perfect...how is your rebound when on really bumpy roads?

[snowdog51]

r1

the shock is so much better than what i had before i need to ride more. i rode over the tracks many times today. its unreal how bad my brand new shocks were.
is comp. the top screw. i'm also on the softest spring setting. more latter
as ever bill

ps how put pics in

[xschop]

comp. screw

I think top is compression, bottom is rebound....check out an R1 forum to be sure. I got lucky that the original shock owner was a big guy like me.....

[Shappers]

Or just check out the link that Tom gave you on Page 2?

[snowdog51]

forks

i did the fork mods the other day the drilling out valve holes made agood improvement.
as ever bill

[snowdog51]

pic

http://www.photodump.com/snowdog51/mcycle1.html

[snowdog51]

photos

http://www.photodump.com/snowdog51

http://www.photodump.com/snowdog51

http://www.photodump.com/snowdog51

http://www.photodump.com/snowdog51

more mono shock pics



as ever bill

[Pat Kelly]

Any way to get the early photos back? Even a link to their new location.

[T99Ford]

Here are some old pics of mine:




I just re-worked the bushings and used the stock shock locations. This was 1500 miles ago, and I have had no problems. I did turn the shock around from how Chop did it, so that I could access the clickers more easily. There would not be enough clearance to do this with a 140 rear tire, though, as the reservoir on the shock nearly touches the tire. You can see this clearance (kind of...) in the second picture.

[Pat Kelly]

Thanks, that's a help. Of course I'm looking for the pic of the top mount so I can get the 1" (or more) height back.
Looking good on your bike!