Who Wants A Bolt-on Chaindrive And Fat Tire?

[forplynu2]

gear ratio

I think it's a 3 to 1 it's been so long I used to know all that stuff I am rinning a 13 tooth front and a 43 tooth rear. It should be a 42 but this is the closest I could find that would bolt up the the wheel. The hard tail is a weld on. I bought a drop seat and recieved a standard so I sent it back then when I got it back the width of the swingarm was 1 1/2" shorter than what I had asked for so I ended up cutting it up and re doing it.

['OlGuiltyBoy]

I think it's a 3 to 1 it's been so long I used to know all that stuff I am rinning a 13 tooth front and a 43 tooth rear. It should be a 42 but this is the closest I could find that would bolt up the the wheel. The hard tail is a weld on. I bought a drop seat and recieved a standard so I sent it back then when I got it back the width of the swingarm was 1 1/2" shorter than what I had asked for so I ended up cutting it up and re doing it.

Everybody I've talked to can't seem to understand that I want one just like they put on the 650's. They keep telling me it'll cost around 1,000 just to put a weld on on my 1100. That's even with me telling them I'd ship them my frame .... Weld ons for the 650 with the same frame diameter and all are going for no more than $300, I'll be damned if I pay 1,000 for one.

[forplynu2]

you can call a company the sells them and have them make you one Thats what I did. Just give them the dimensions or just tell them you want the bottom frame rails to be 10 1/2" apart and to widen it for what size tire you want.

[forplynu2]

Oh yeah I paid 350 for mine but it was a headache because it took so long and I had to re do it. Plus they had to make a frame jig because they have not made one for a 250 series tire yet. I used elsewick cycles I think...

['OlGuiltyBoy]

Oh yeah I paid 350 for mine but it was a headache because it took so long and I had to re do it. Plus they had to make a frame jig because they have not made one for a 250 series tire yet. I used elsewick cycles I think...

yea, i ran across their site. they were all the way in california and i wasnt shipping my frame to the east coast and back. i'll give them a call and see if they can help me out then since thats who you used.

['OlGuiltyBoy]

Talked to the guy from Elswick cycle today. I'm gonna send my frame out there to them and let them hardtail it. Pretty decent price too ...

[scappod]

No Longer selling...

Hey good morning everyone long time no hear...
So PITA is no longer for sale we have come to an understanding.... If you look at my ne icon you can see the new tank and all of the recent work... she was in some dudes shop who had no vision so I took her home and voila! almost ready to gitter dun....
The chain drive is done and the exhaust is underway so...