1st gear guru question

[xschop]

I don't have an extra 1st gear to look at right now. Need to know how many teeth are there, possibly diameter too.....

[Lamric]

First gear wheel ( 2H7-17211-00-00 ) has 38 teeth. Dunno about diameter though.

[xschop]

teeth

So. my next and maybe last question is, If I want to increase the ratio of first gear, would I want that wheel diameter to go larger or smaller in the XS11?

[midnight1980]

Re: teeth

Originally posted by xschop
So. my next and maybe last question is, If I want to increase the ratio of first gear, would I want that wheel diameter to go larger or smaller in the XS11?

too be quicker off the line,





it would be a larger gear

Gears work exactly like levers. A small gear driving a larger one gives an increase in torque, and a decrease in speed, and vise-versa.

http://www.innerauto.com/Automotive_Systems/Front_Wheel_Drive_Transmission/1st_Gear/

[xschop]

1st gear ratio

so what is the xs11's 1st gear ratio?

[midnight1980]

Re: 1st gear ratio

Originally posted by xschop
so what is the xs11's 1st gear ratio?

http://www.xs11.com/forum/printthrea...4&pagenumber=2

According to the Yamaha shop manual the overall 1st. gear ratio in the 850 Special was 10.79 vs 12.07 for the XS Eleven and 5th.

[xschop]

ratios

all the older writeups and some people are confusing on gear ratios....OVERALL and individual (1st gear) ratios I believe are getting lost in the translation. I just looked at some specs for a XS750D and the 1st gear ratio stated 13.0....I cannot find a fiche on this model. If i can get ahold of a taller (bigger gear diameter, I will mod it to go in the xs11 tranny(if need be)....

[xschop]

main shaft

to be clear, the main shaft teeth drive the 1 gear wheel? someone chime in please.....