1982 XJ Carb parts interchange??

[underdog57]

Pretty much just need float needle and seat , So was wondering
if the 1980 and 1981 xs1100's had the same press in needle/seat ...Plus several xs 650's ...


And if this carb needs to have the rubber plugs over the pilot jet hole ?? They had none when I took it apart ..

I did try to look this up , but this carb was a tad sketchy on info ..
Now what someone pull reams of data up !!!

The pilot jets were 45's so looks like someone changed them from 47.5 . The mains are 112.5 so looks like the carbs are original ..

Thanks

Bob

[red bandit]

80 and 81 float needles and seats are the same. You shouldn't have to replace the seats, they usually are ok.
If you don't have a hole connecting the main jet tower and the pilot jet tower then you don't need the rubber plugs. If you have a hole,then you need the plugs.
Standard pilots jets are 42.5 for the 80-81, not 45 or 47.5
I've seen main jets for the 80-81 from 110 to 120 and everything in between.

[underdog57]

Will order

Thanks Red Bandit ,

I can save the needle valve seats , but I did smoosh them a little,they were so stuck with tar ... wish I was more carefull with them !!

Will look at the main/pilot for a hole or not to see if they need the plugs ..

Bob