Bad smoke

[Crazcnuk]

Hasn't got here yet, but with coming over the border, it doesn't surprise me!

I have other little parts coming coming too, gaskets and what not, so not in too big a rush.


How does that breather come out? do I have to take the back wheel off?

[Crazcnuk]

The head arrived today! Thx Caferacer.

I have a friend that has all the equip to do complete valve jobs, so I am going to get him to do a once-over on it before I put it on the bike, while I wait for the Cam chain to get here.

Gasket set also arrived today, so he can put the new seals on for me.

[caferacer]

great good luck to you i hope it all gos well

[Crazcnuk]

Originally posted by caferacer
great good luck to you i hope it all gos well

Thanks. Going to use the 2 1st over ring sets I got from you and buy 2 more sets for the other 2 cylinders.

I measured up the bores and the cylinders are well within spec, just need a light hone, for the the new rings, and will be all set.

I borrowed an Ammo tent from my local army unit so I have the bike covered and out of the weather.

[randy]

crazcnuk,

don't install the rings until you check the end gap, they may need to be filed and fitted (first and second rings only)

[Crazcnuk]

Yes, they will all have to be 'hand' fitted, with a file. That isn't anything new for me. Just takes a little time, but you get the right end gap all the time.