Announcement

Collapse
No announcement yet.

pulse generators for honda VF1000f

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pulse generators for honda VF1000f

    been looking around the United Kingdom for Manufacturers of replacement pulse generators for my VF1000F interceptor but failed to find someone
    Are there any one in the USA that makes this item
    I think I have a better chance of finding some new ones in America.


    Any suggestions welcomed
    The old ones are the best 9000 miles from new and rising
    got a Honda VF1000f 1984 for the summer in the United Kingdom.Wow its Fast,Too fast for Me

    1982 Xj1100J Maxim US Specfast keeps going
    1984 VF1000F Interceptor UK need repair sticking pro link joint, off the road currently but in a newly built 17ft wooden garage, just got to finish it

  • #2
    Is that referring to ignition coils? .......if so any of the VF series 3ohm coils are 'plug'n'play'......500.....750......1000. Have ohm meter with you and check across the two connectors for 3ohm resistance before buying. IMO, 2.7ohm would be the cut-off point, and that DOES indicate they would be headed 'south' for longgivity anyways.
    BTW, the VF Honda series coils are a cheap, reliable plug'n'play coil for our Yammy XS bikes too .......bolt right up, plus the benefit of using any 7mm high-temp resistant plug wire of your choice .
    81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.

    Comment


    • #3
      Pulse generators

      These are what I am looking for below

      These are fitted inside the engine with oil
      pulse first then spark boxes then coils then plugs

      there must be someone that makes them 480 ohms
      The old ones are the best 9000 miles from new and rising
      got a Honda VF1000f 1984 for the summer in the United Kingdom.Wow its Fast,Too fast for Me

      1982 Xj1100J Maxim US Specfast keeps going
      1984 VF1000F Interceptor UK need repair sticking pro link joint, off the road currently but in a newly built 17ft wooden garage, just got to finish it

      Comment


      • #4
        Originally posted by windysolar1 View Post
        These are what I am looking for below

        These are fitted inside the engine with oil
        pulse first then spark boxes then coils then plugs

        there must be someone that makes them 480 ohms
        Thanks!.......wasn't a wasted day.......I learned something .
        81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.

        Comment


        • #5
          Originally posted by windysolar1 View Post
          been looking around the United Kingdom for Manufacturers of replacement pulse generators for my VF1000F interceptor but failed to find someone
          Are there any one in the USA that makes this item
          I think I have a better chance of finding some new ones in America.


          Any suggestions welcomed
          Have you considered a used one? There are a few used ones for sale on eBay...

          http://www.ebay.com/itm/111430718140
          Last edited by WMarshy; 08-29-2014, 05:53 AM.
          '79 XS11 F
          Stock except K&N

          '79 XS11 SF
          Stock, no title.

          '84 Chevy K-10 "Big Blue"
          GM 350, Muncie SM465, NP208, GM 10 Bolt with 3.42gears turnin 31x10.5 Baja Claws

          "What they do have is an implacable, unrelenting presence and movement that bespeaks massive power lurking behind paint and chrome. They don't wail like a screeching ninja, the don't rumble like a harley. They just growl like a spactic, stressed out badger waiting to rip your face off and eat your soul." Trainzz~RIP~

          Comment


          • #6
            pulse generators wanted new parts

            been looking for someone that makes direct replacement parts because there is a huge shortage of vf1000 parts.
            only less than 50 in the UK

            still looking
            The old ones are the best 9000 miles from new and rising
            got a Honda VF1000f 1984 for the summer in the United Kingdom.Wow its Fast,Too fast for Me

            1982 Xj1100J Maxim US Specfast keeps going
            1984 VF1000F Interceptor UK need repair sticking pro link joint, off the road currently but in a newly built 17ft wooden garage, just got to finish it

            Comment


            • #7
              This outfit is showing the whole pulse generator assembly as available. I don't know if they're new or used - CMSNL pulse generator, etc.
              I think I have a loose screw behind the handlebars.

              '79 XS11 Standard, Jardine 4/1, Dyna DC1-1 Coils, 145 mains, 45 pilots, plastic floats - 25.7mm, XV920 fuel valves, inline fuel filters, speed bleeders, Mikes XS pods, spade-type fuse block, fork brace, progressive fork springs/shocks, manual petcocks, 750 FD, Venture cam chain tensioner, SS brake lines

              Comment

              Working...
              X