Tweet
Looking to paint my engine soon, and figured wood would be cheapest.
-
1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights. -
JAT, when I remove my SF's engine, for repainting of the frame, I'll most likely run rods through the mount bosses and hang it from the rafters so it can be easily accessed, top to bottom.
I know crazySteve built a metal engine stand, it's in one of his posts, if your looking for ideas.
1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors
)
1979 XS1100SF (stock-euro mods planned)
1984 XV700L Virago (to be hot-modded)
1983 XJ750MK Midnight Maxim (semi-restored DD)
1977 XS650D ( patiently awaiting resto)
Sometimes it takes a whole tank of gas before you can think straight.
-
Been there, but I don't trust the valve cover holding up a 400 lb. Engine
https://www.dropbox.com/s/d8tcxb1hbyiz1bk/IMAG0139.jpg1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.Comment
-
Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
Been there, but I don't trust the valve cover holding up a 400 lb. Engine
https://www.dropbox.com/s/d8tcxb1hbyiz1bk/IMAG0139.jpg1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.Comment
-
Yeah Steve, but I don't want to buy an engine stand for a $30 paint job.1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.Comment
-
...rods through the MOUNT BOSSES... is nothing like the pic, and it will allow every part of the engine to be painted.Originally posted by IanDMacDonald View Post1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors )
1979 XS1100SF (stock-euro mods planned)
1984 XV700L Virago (to be hot-modded)
1983 XJ750MK Midnight Maxim (semi-restored DD)
1977 XS650D ( patiently awaiting resto)
Sometimes it takes a whole tank of gas before you can think straight.Comment
-
Paint one side and roll it over when dry and paint the other side. I did this and it came out ok, YMMV.2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮Comment
-
Yeah, I guess I read that too quick. Maybe that's what I'll do again. I hope joists above can hold the weight of the engine . . .Originally posted by Schming View Post1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.Comment
-
You could build a 2x4 frame box and have a rod through the mount holes hold the engine up..."Time is the greatest teacher; unfortunately, it kills all of its students."Comment
-
If you have open ceiling joists ( no drywall or floor above) span a few with a couple 2x4's, to take the weight, and hang the engine off of them. Use a little longer rods so the slings, straps, ropes, chains or whatever you use to hang it, are out of your way.Originally posted by IanDMacDonald View Post1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors )
1979 XS1100SF (stock-euro mods planned)
1984 XV700L Virago (to be hot-modded)
1983 XJ750MK Midnight Maxim (semi-restored DD)
1977 XS650D ( patiently awaiting resto)
Sometimes it takes a whole tank of gas before you can think straight.Comment
-
+1. Having had the engine out and moved it around, I can tell you it is a heavy pig of an engine. I am not sure how you folks are getting your engines that high up off the floor. Maybe I am getting older than I thought, but lifting that engine by hand is not an option for me these days.Originally posted by bikerphil View PostLife is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750Comment
-
Don- I'm 28, full of pee & vinegar, and that engine is too heavy for me! I used the ratcheting straps on my 750 to lift it.1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.Comment
-
I hear ya buddy, no more Hero here either.Originally posted by DGXSER View Post
I've got a few different hoists at my disposal and my favorite is the small electric 800lb. one.
1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors )
1979 XS1100SF (stock-euro mods planned)
1984 XV700L Virago (to be hot-modded)
1983 XJ750MK Midnight Maxim (semi-restored DD)
1977 XS650D ( patiently awaiting resto)
Sometimes it takes a whole tank of gas before you can think straight.Comment
-
hahaha, when I picked up my newest bike, I brought ramps to push it on pick up bed....brakes were frozen shut so no way that would work....
guy I bought it from was handicap, so he couldn't help....I'm thinking I'm stuck....
He calls a couple of scrunny kids over, they pick it up without my help and THROW it on my pick up!!!
Never judge book by its cover...Nick
1979 XS11 F,Yamaha fairings w/hard bags, TC's fuse box, K&N air filter
1982 Virago 750 (it's alive!)
1979 XS 11 F, Windjammer IV, Samsonite luggage cases(another rescue)Comment
Comment