Announcement

Collapse
No announcement yet.

80SG needle jets aka main nozzles

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    80SG needle jets aka main nozzles

    I'm looking for some new/used Needle Jets(aka main nozzle/emulsion tubes)
    When i pulled the ones off my projuect bike, they were GREEN with corrosion and I tried to clean them up as best I can, but with all those holes....
    I was wondering if the ones listed over at MikesXS will work.
    There are 2 listed there that look the same.
    Part# 48-0660 or #48-0662
    At $13.50 each, It can't hurt to put new ones in right?
    Hi, my name is George & I'm a twisty addict!

    80G (Green paint(PO idea))
    The Green Monster
    K&N A/F, TC's fuse block, '81 oil cooler, TC's homemade 4-2 w/Mac Mufflers, Raptor 660 ACCT
    Got him in '04.
    bald tire & borrowing parts

    80SG (Black w/red emblems & calipers)
    Scarlet
    K&N A/F, TC's fuse block, WJ5, Shoei bags, Raptor 660 ACCT.
    Got her in '11
    Ready for the twisties!

    81H (previously CPMaynard's)
    Hugo
    Full Venturer, Indigo Blue with B/W painted tank.
    Cold weather ride
    Tags: None
  • #2
    I might have answered my own question. The ones over at MikeSX don't have the little half shroud around the opening that goes in the carb throat.
    Hi, my name is George & I'm a twisty addict!

    80G (Green paint(PO idea))
    The Green Monster
    K&N A/F, TC's fuse block, '81 oil cooler, TC's homemade 4-2 w/Mac Mufflers, Raptor 660 ACCT
    Got him in '04.
    bald tire & borrowing parts

    80SG (Black w/red emblems & calipers)
    Scarlet
    K&N A/F, TC's fuse block, WJ5, Shoei bags, Raptor 660 ACCT.
    Got her in '11
    Ready for the twisties!

    81H (previously CPMaynard's)
    Hugo
    Full Venturer, Indigo Blue with B/W painted tank.
    Cold weather ride

    Comment

    • #3
      As with the jets themselves, those emulsion tubes (that is what they are called) are also numbered differently for different applications. I doubt the 650's are the same as the 1100's.
      Nathan
      KD9ARL

      μολὼν λαβέ

      1978 XS1100E
      K&N Filter
      #45 pilot Jet, #137.5 Main Jet
      OEM Exhaust
      ATK Fork Brace
      LED Dash lights
      Ammeter, Oil Pressure, Oil Temp, and Volt Meters
      Green Monster Coils
      SS Brake Lines
      Vision 550 Auto Tensioner

      In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

      Theodore Roosevelt

      Comment

      • #4
        Thanks Nate. Yeah the part number for those tubes is: 3H5-14941-02-00 and are only applicable to the 80-82 1100s.

        I don't suppose you have an extra 4 of them hanging out at your place?

        I can get the other jets from georgefix. I plan on getting the complete rebuild kit for $69. That way I'll get the new float valves, idle mix screws (& o-rings) Bowl gaskets and new mains & pilots.

        I've read everywhere here that the 80SGs have (4) 110s, but the microfiche says 120/125s. I'll have to take mine apart again and see what's in there.
        Hi, my name is George & I'm a twisty addict!

        80G (Green paint(PO idea))
        The Green Monster
        K&N A/F, TC's fuse block, '81 oil cooler, TC's homemade 4-2 w/Mac Mufflers, Raptor 660 ACCT
        Got him in '04.
        bald tire & borrowing parts

        80SG (Black w/red emblems & calipers)
        Scarlet
        K&N A/F, TC's fuse block, WJ5, Shoei bags, Raptor 660 ACCT.
        Got her in '11
        Ready for the twisties!

        81H (previously CPMaynard's)
        Hugo
        Full Venturer, Indigo Blue with B/W painted tank.
        Cold weather ride

        Comment

        • #5
          Originally posted by GLoweVA View Post
          I don't suppose you have an extra 4 of them hanging out at your place?
          Sorry I dont have any spares.
          Nathan
          KD9ARL

          μολὼν λαβέ

          1978 XS1100E
          K&N Filter
          #45 pilot Jet, #137.5 Main Jet
          OEM Exhaust
          ATK Fork Brace
          LED Dash lights
          Ammeter, Oil Pressure, Oil Temp, and Volt Meters
          Green Monster Coils
          SS Brake Lines
          Vision 550 Auto Tensioner

          In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

          Theodore Roosevelt

          Comment

          • #6
            Brasso and a tiny tube brush will clean those up. Pay paticular attention to the holes as they can get a bit elonggated over years of use, and alot of times that is just a build up around the holes.
            81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.

            Comment

            • #7
              Thanks nate. I didn't think about brasso. I'll try to Polish them when I get some free time.
              Hi, my name is George & I'm a twisty addict!

              80G (Green paint(PO idea))
              The Green Monster
              K&N A/F, TC's fuse block, '81 oil cooler, TC's homemade 4-2 w/Mac Mufflers, Raptor 660 ACCT
              Got him in '04.
              bald tire & borrowing parts

              80SG (Black w/red emblems & calipers)
              Scarlet
              K&N A/F, TC's fuse block, WJ5, Shoei bags, Raptor 660 ACCT.
              Got her in '11
              Ready for the twisties!

              81H (previously CPMaynard's)
              Hugo
              Full Venturer, Indigo Blue with B/W painted tank.
              Cold weather ride

              Comment

              Previous template Next
              Working...
              X