2018 Colorado Rally, July 12-16
Collapse
X
-
You're doing the long-haul ride again, Jeff, right on!What time you expecting Rally HQ to be operational on Thurs?
After you guys meet & ride on Thurs, or before?
As the wind blows, great plan. Everybody happy.
I should show up Thurs early evening and plan to ride along on whatever ride happens on Friday.
and Saturday ....... and Sunday .......
I'll be hitting up the Walmart in Salida on the way in for a few things I don't want to drag along all the way from Georgia.
Jeff
In the past, I've had a tendency to overpack. (innocent look) I'm not even bringing a sleeping bag or a tent this time, I got one of those KOA port-a-cabins. You have to bring your own bedding for those so I'll buy a bag in Buena Vista or Salida, then leave it at the campground or with the first homeless person I see.
Those were good, weren't they! Nobody believed me until they tried 'em but that was fine, more for us.
Leave a comment:
-
lol.....remember the tequila'n'marshmellews WAY to well at the Caly Rally in 2010Roo called and we talked about the layover in Mesquite, he's got the room booked. I don't know if the SoCal crew and I are traveling together or not, we need to do some more communicationing and I may have to change my KOA reservation to only 3 nights. That's going to hurt.
Right now, I have 4 nights at the KOA, Thursday, July 12, 2018 - Monday, July 16, 2018.
I finally planned an extra day on-site to give me time to recover from the ride and get semi-sort-of-acclimated to the altitude that's been kicking my tail. I start out at 800' in California, then end up somewhere in the Colorado mountains where I can read the name tags on the flight crew and flick leftover tequila s'more marshmallows on them when their jets fly overhead.
Every time so far, I've been dragging the next day and not really enthusiastic about riding until Sunday, then the rally's over and it's time to go home.

.
Leave a comment:
-
Rally HQ
What time you expecting Rally HQ to be operational on Thurs?
After you guys meet & ride on Thurs, or before?
As the wind blows, great plan. Everybody happy.
I should show up Thurs early evening and plan to ride along on whatever ride happens on Friday.
and Saturday ....... and Sunday .......
I'll be hitting up the Walmart in Salida on the way in for a few things I don't want to drag along all the way from Georgia.
JeffLast edited by JeffH; 06-22-2018, 06:19 PM.Leave a comment:
-
That’s a good by-product for you arriving on Thursday, Scott. I hadn’t thought of that, for sure will help guys that show up early from low elevation. For the guys that are here Thursday we can do a more local and shorter ride Friday, we’ll figure that one out based on who’s there and where the wind wants to blow us.Last edited by Bonz; 06-22-2018, 04:36 PM.Leave a comment:
-
Roo called and we talked about the layover in Mesquite, he's got the room booked. I don't know if the SoCal crew and I are traveling together or not, we need to do some more communicationing and I may have to change my KOA reservation to only 3 nights. That's going to hurt.
Right now, I have 4 nights at the KOA, Thursday, July 12, 2018 - Monday, July 16, 2018.
I finally planned an extra day on-site to give me time to recover from the ride and get semi-sort-of-acclimated to the altitude that's been kicking my tail. I start out at 800' in California, then end up somewhere in the Colorado mountains where I can read the name tags on the flight crew and flick leftover tequila s'more marshmallows on them when their jets fly overhead.
Every time so far, I've been dragging the next day and not really enthusiastic about riding until Sunday, then the rally's over and it's time to go home.
Leave a comment:
-
Always gotta' make a test run Scott!....should make for a decent ride. Also, your HD will fit nicely in the 'man-cave' amongst the other variety of rides coming here on way to Buenny Rally in JulyIt's complicated, Mike, I'll be riding the Harley.
Yesterday, I started to add the power wires for the Garmin, today I have to finish installing it. If you're going to be home this weekend, I was thinking about a ride down to Sun Diego to make sure it works.
On the XJ, there's some weirdness with the windshield brackets where they're attached to the front turn signal mounts. I can't remember what it is right now but I can't just remove the windshield brackets and have front turn signals that work. To make things even better, when the windshield brackets were, uh, mounted to the triple tree, the stock Grade 8 bolts and washers for the fork tube clamps were kludged with longer bolts and larger washers that don't fit down into the recessed well in the upper fork tube clamp.
Unfortunately, the threaded part of the longer bolts is too short and without the windshield brackets, they run out of thread and bottom out on the bolt shank before they cinch the triple tree clamps to the fork tubes. I'd use a die to fix the threads but Grade 8 bolts aren't fun to work with and it would definitely mess up the anti-rust coating.
The mount brackets can't be removed or the forks will fall off and the turn signals won't work so I've just been riding it with the empty brackets sticking out like antlers because I'm too lazy to buy new bolts and washers. The bike runs and handles like a terrified female tree rat.
.
Leave a comment:
-
It's complicated, Mike, I'll be riding the Harley.Howdy 3Phase,,,,maybe bum the clipon windshield Roo used on his bobber for the rally on his Greenie...its got good protection and quick to install since he is taking his VTX,,,,,,or you can ride down here I have a choice of a Black Vetter setup or a clip on full size slipstreamer. Without a fairing the long ride would be a challenge. Good Luck...................Mike in San Diego
Yesterday, I started to add the power wires for the Garmin, today I have to finish installing it. If you're going to be home this weekend, I was thinking about a ride down to Sun Diego to make sure it works.
On the XJ, there's some weirdness with the windshield brackets where they're attached to the front turn signal mounts. I can't remember what it is right now but I can't just remove the windshield brackets and have front turn signals that work. To make things even better, when the windshield brackets were, uh, mounted to the triple tree, the stock Grade 8 bolts and washers for the fork tube clamps were kludged with longer bolts and larger washers that don't fit down into the recessed well in the upper fork tube clamp.
Unfortunately, the threaded part of the longer bolts is too short and without the windshield brackets, they run out of thread and bottom out on the bolt shank before they cinch the triple tree clamps to the fork tubes. I'd use a die to fix the threads but Grade 8 bolts aren't fun to work with and it would definitely mess up the anti-rust coating.
The mount brackets can't be removed or the forks will fall off and the turn signals won't work so I've just been riding it with the empty brackets sticking out like antlers because I'm too lazy to buy new bolts and washers. The bike runs and handles like a terrified female tree rat.
Leave a comment:
-
OK, the shirt order is placed, added a few extra in popular sizes for folks that want one but haven’t responded yet.
Three out of four evenings this week have been beautiful for riding. Been doing 78 miles out and back each evening on the ZRX on a favorite sweeper curve road that leads to a fun twisty canyon road. I am liking the new Road Smart 3 tires, good tire overall. Got to get to know the new tires before I start leading you guys around in the mountains again!
Talked with Harry, he is rolling Shinko 009 Raven’s on his FJR. I ran the same tires on my ZRX and got over 10,000 miles from the rear and 12,500 out the front. Ran a set of Shinko Verge tires after them and got similar mileage. Maybe a tad less, but close enough to call them equal. Info for the sport touring fellows if they’re going to put new rubber on before the rally.
On another note, found my copy of Keith Code’s book “Twist of the Wrist II”. Man, there’s some good stuff in there in terms of riding technique and throttle control especially navigating corners. I think everyone who rides should have copy of it, no matter where you are riding, will be riding, or how much you think you know.Leave a comment:
-
windshield for Scott
Howdy 3Phase,,,,maybe bum the clipon windshield Roo used on his bobber for the rally on his Greenie...its got good protection and quick to install since he is taking his VTX,,,,,,or you can ride down here I have a choice of a Black Vetter setup or a clip on full size slipstreamer. Without a fairing the long ride would be a challenge. Good Luck...................Mike in San DiegoLeave a comment:
-
For some reason, I didn't get a text message alert when you sent it, Bonz, but I opened up the little text app on my phone and there it was -- sorry about that!
I'll be on the Harley this year but I was thinking about bringing the XJ because Yamaha. The XJ's not made for long rides and I haven't been able to find a new windshield for it. The cracked windshield that came with the bike and managed to survive the trip to XSSE last year finally broke off the bike when I dropped it in the parking lot. Oh, shucky-darn.
I had fun stomping it into little bitty pieces and putting them in the trash but replacements that fit the XJ11 brackets are unobtanium unless I want to buy one that might fit, then pay return shipping and stocking if it doesn't.
To heck with that for a game of horseshoes, it's more fun riding the XJ locally and up in the hills without the windshield anyway so pffft.
Leave a comment:
-
Hey guys, I held off on the order one more day.
Mike- Any word from your buddy or Roo?
Sebastian- Texted and left a message, you get special treatment! You started this thread wayback, full of ambition, you’re going to be in for a shirt if I don’t hear from you.
.
Jerry (CZ)- Hope you are well. Send me a sign, any sign. Just so it has a T-shirt size...
Talked to Scott, he got his order in.Leave a comment:
-
Hi guys, we are at 17 shirts. 3Phase hasn’t checked in (got 2 shirts last year), soccer4m is getting his buddy and Roo’s info to me (2 shirts I hope), CaptonZap hasn’t gotten back to me on size yet (1 shirt last year) which has me a bit “concerned” as I have left a phone message as well. Sebastian has not checked in since I posted this last week and sent a PM (1 shirt last year).
If any of you guys that have already ordered one shirt want to add a second shirt, that will help asssure we make the 24 in order to get this pricing on the shirts. Otherwise it will go up $1-$2 per shirt and I would collect that from guys at the rally.Leave a comment:
-
Thanks Jeff. Need 3Phase to check in while he’s out on the road! Mike is getting the others of the California contingent taken care of and getting the numbers.Leave a comment:
Leave a comment: