Announcement

Collapse
No announcement yet.

A couple of electrical questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A couple of electrical questions

    Two question...

    1) is this the tip over switch?





    2) Where is a good place to get power for rear running lights?
    '81 XS1100 SH

    Melted to the ground during The Valley Fire

    Sep. 12th 2015

    RIP

  • #2
    Oh yeah, do I just unplug it and leave it alone, or do I need to re-complete the circuit to remove it for good?
    '81 XS1100 SH

    Melted to the ground during The Valley Fire

    Sep. 12th 2015

    RIP

    Comment


    • #3
      That's the animal. I think Randy says it best. "Throw into nearest trash bin"

      You dont have to do anything with what's left, when it activates it grounds out the ignition. I filled my connector up with silicone, just to make sure nothing got in there and did the same.
      80 XS1100SG
      81 XS400SH

      Some men miss opportunity because it is dressed in overalls and looks like work. - Thomas Edison

      A Few Animations I've Made

      Comment


      • #4
        When I converted my rear turn to turn/run I tapped into the tail light circut.
        Pat Kelly
        <p-lkelly@sbcglobal.net>

        1978 XS1100E (The Force)
        1980 XS1100LG (The Dark Side)
        2007 Dodge Ram 2500 quad-cab long-bed (Wifes ride)
        1999 Suburban (The Ship)
        1994 Dodge Spirit (Son #1)
        1968 F100 (Valentine)

        "No one is totally useless. They can always be used as a bad example"

        Comment

        Working...
        X