Announcement

Collapse
No announcement yet.

Vetter fairing mounting bracket?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vetter fairing mounting bracket?

    anybody have a mounting bracket for a vetter fairing?

    Been scouring the net & ebay and all i have found so far is one for a XS850.....not sure if that would mount to my 1100 frame or not though

    anybody?
    BikeWorx®
    South Haven, Michigan

  • #2
    If you need to fabricate one, I'll send you measurements, diagram, and pix.
    Skids (Sid Hansen)

    Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.

    Comment


    • #3
      let me see what turns up 1st, fabrication i can do, but just bolting one on is alot simpler

      Thanx, i'll let ya know!
      BikeWorx®
      South Haven, Michigan

      Comment


      • #4
        speaking of vetter mounts, would one off of a xs750-850 work?

        I've had a few 750's in the past, but i cannot remember if the frame was the same or not.......i'm inclined to think NOT though
        BikeWorx®
        South Haven, Michigan

        Comment


        • #5
          I am betting it would work, but I just don't know.

          Originally posted by BikeWorx
          speaking of vetter mounts, would one off of a xs750-850 work?

          I've had a few 750's in the past, but i cannot remember if the frame was the same or not.......i'm inclined to think NOT though
          Skids (Sid Hansen)

          Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.

          Comment


          • #6
            Hey, I have a vetter fairing mount off a 79 special. Have no use for it now. Let me know if cant fine one. Havent a clue what to charge for it, but it will be cheap. Gotta look out for my fellow XS'ers.
            When a 10 isn't enough, get a 11. 80g Hardbagger

            Comment


            • #7
              Let me know what you want for it, and i'll take it!
              BikeWorx®
              South Haven, Michigan

              Comment


              • #8
                http://craigvetter.com/pages/Vetter_...y_of_part.html
                1978 XS1100E
                1982 XJ650RJ Seca
                2001 Yamaha XT225
                2002 Suzuki DR650
                2008 Suzuki DL650 VStrom
                AMA charter life member

                Comment


                • #9
                  still needing a bracket......surely someone has one lying around
                  BikeWorx®
                  South Haven, Michigan

                  Comment

                  Working...
                  X